Table of Contents
Advertisement
Table 14. POST Behavior (continued)
Option
Full Screen Logo
Table 15. Virtualization Support
Option
AMD-V Technology
AMD-VI Technology
Table 16. Maintenance
Option
Service Tag
Asset Tag
SERR Messages
BIOS Downgrade
Data Wipe
BIOS recovery
Table 17. Manageability
Option
Broadcom@ TruManage
Table 18. System Logs
Option
BIOS Events
Table 19. SupportAssist System Resolution
Option
Auto OS Recovery Threshold
Updating the BIOS in Windows
It is recommended to update your BIOS (System Setup), when you replace the system board or if an update is available.
NOTE:
If BitLocker is enabled, it must be suspended prior to updating the system BIOS, and then re-enabled after the BIOS
update is completed.
Description
● 10 seconds
This options is disabled by default.
Description
This option is enabled by default.
This option is enabled by default.
Description
Displays the Service Tag of your computer.
Allows you to create a system asset tag if an asset tag is not already set. This option is set
by default.
Controls the SERR message mechanism. This option is set by default. Some graphics cards
require that the SERR message mechanism be disabled.
Allows you to control flashing of the system firmware to the previous versions. This option is
enabled by default.
NOTE:
If this option is not selected, the flashing of the system firmware to the previous
versions is blocked.
Allows you to securely erase the data from all the available internal storages, such as HDD,
SSD, mSATA, and eMMC. The option Wipe on Next Boot is disabled by default.
Allows you to recover the corrupted BIOS conditions from the recovery files on the primary
hard drive. The option BIOS Recovery from Hard Driveis selected by default
Description
Displays the system manageability feature.
● Disable
● Enable (selected by default)
Description
Displays the system event log and allows you to:
● Keep(Default enabled)
● Clear
Description
Options are: OFF, 1, 2 (default), 3.
System setup
67
Advertisement
Table of Contents
