Setting The End Time; Setting The Timer - Siemens HB334AB 0W Series Instruction Manual

Use the or button to set the cooking time.
A @
3.
The appliance will start heating after a few seconds. The
remaining time will count down on the display.
The cooking time has elapsed
An audible signal will sound. The appliance will stop
heating. The cooking time will be zero on the display.
Once the signal stops, you can touch the
set a new cooking time.
Once your food is cooked, turn the function selector to
the "Off" position to switch the appliance off.
Changing and cancelling
You can use the or
A @
time at any time.After a few seconds, the change will be
applied.
To cancel, use the button to reset the cooking time all
A
the way to zero. The appliance will continue heating
without a cooking time.

Setting the end time

You can delay the time at which cooking is due to
finish. You can, for example, put your food in the
cooking compartment in the morning and set the
cooking time so that it is ready at lunch time.
Notes
Make sure that food is not left in the cooking
■
compartment for too long as it may spoil.
Do not adjust the end time once the appliance is
■
already in operation. Otherwise the cooking result
may no longer be satisfactory.
The end of the cooking time can be delayed by up to
23 hours and 59 minutes.
Example in the picture: The time is 10.30 a.m., a
cooking time of 45 minutes has been set and you want
the food to be ready at 12.30 p.m.
Set the type of heating and temperature or setting.
1.
Touch the button twice and use the
v
2.
to set the cooking time.
@ button to
button to change the cooking
or
A @
Touch the
3.
The end time
Use the
4.
The appliance will apply the settings after a few
seconds. The end time will be shown on the display.
Once the appliance starts, the time will begin counting
down.
The cooking time has elapsed
An audible signal will sound. The appliance will stop
heating. The cooking time will be zero on the display.
Once the signal stops, you can touch the
set a new cooking time.
Once your food is cooked, turn the function selector to
the "Off" position to switch the appliance off.
Changing and cancelling
You can use the
After a few seconds, the change will be applied. The
end time cannot be changed once the cooking time has
already started to count down. Otherwise the cooking
result would no longer be satisfactory.
To cancel, use the
way back to the current time plus the cooking time. The
appliance will start to heat and the cooking time will
start to count down.

Setting the timer

button
You can use the timer whether or not the appliance
itself is in use. However, it is not possible to set a
cooking time or end time.
The maximum time that can be set is 23 hours and 59
minutes. Up to 10 minutes, the timer duration can be
set in 30-second increments. Above 10 minutes, the
time increments become longer the higher the value.
The timer duration will start at a different default value,
depending on which button you touch first:
Time-setting options
button again.
v
will be highlighted on the display.
y
or button to delay the end time.
@ A
or button to change the end time.
A @
button to set the end time all the
A
en
button to
@
13