Getting Started; Charging The Battery; Assembling The Vacuum - Hoover ONEPWR Evolve Pet Elite User Manual

CHARGING THE BATTERY

THIS MACHINE IS ONLY TO BE USED WITH HOOVER ONEPWR BATTERIES AND CHARGER.
PLEASE READ THE BATTERY AND CHARGER USER GUIDES BEFORE USE.
NOTE:
Before first use, ensure the battery is fully charged. Failure to fully charge the battery before first use
may result in poor battery performance. The life expectancy of the battery will vary depending on the usage of the
machine.
Plug in the charger. Attach the battery
pack to the charger by aligning the ribs
on the battery pack to the grooves in
the charger.

ASSEMBLING THE VACUUM

Push the handle into the main body
until it clicks into place.
The charger light will flash white to
show when the battery is charging. The
light on the charger will stop flashing
and go off when the battery is fully
charged.
NOTE:
The handle contains electrical connections. To ensure that the handle
has been correctly installed, please ensure a "click" sound is audible during
the installation of the handle.

GETTING STARTED

Once fully charged, slide the battery off
the charger to remove.
To check the battery charge
level press the battery symbol.
7