Yamaha FZ07HC 2016 Owner's Manual page 65

1
1. Coolant reservoir cap
4. Add coolant to the maximum level
mark, and then install the reservoir
cap. NOTICE: If coolant is not
available, use distilled water or
soft tap water instead. Do not
use hard water or salt water
since it is harmful to the engine.
If water has been used instead
of coolant, replace it with cool-
ant as soon as possible, other-
wise the cooling system will not
be protected against frost and
corrosion. If water has been
added to the coolant, have a
Yamaha dealer check the anti-
freeze content of the coolant as
Periodic maintenance and adjustment
soon as possible, otherwise the
effectiveness of the coolant will
be reduced.
[ECA10473]
Coolant reservoir capacity (up to
the maximum level mark):
0.25 L (0.26 US qt, 0.22 Imp.qt)
To change the coolant
1. Place the vehicle on a level surfa-
ce and let the engine cool if neces-
sary.
2. Place a container under the en-
gine to collect the used coolant.
3. Remove the radiator cap retaining
bolt and radiator cap. WARNING!
Never attempt to remove the ra-
diator cap when the engine is
hot.
[EWA10382]
7-14
EAU59863
1. Radiator cap
2. Radiator cap retaining bolt
4. Remove the coolant reservoir cov-
er by removing the bolt and quick
fastener, and then remove the
coolant reservoir.
1
3
1. Coolant reservoir cover
2. Bolt
3. Quick fastener
2 1
7
2