Table of Contents
Advertisement
Revision History
Rev.
Details
1.0
Initial Release
1.1
Made the following updates:
•
Added Command Class Clock section.
•
Added Clock Report to the Association Group Info commands list.
•
Marked Time as a secure command class.
•
Added the following note to Time, Time Parameters, and Clock
command classes: "If the controller does not support either the
Time CC, Time Parameters CC, or Clock CC, then scheduled users
will not have access."
•
Added a brief description of the time syncing mechanism to the
Command Class Time section.
•
Changed Master Code slot from 0xFB to 0x00 in Notifications
Table.
1.2
Made the following updates:
•
Marked the Version command class as secure.
•
Added Basic command class.
•
Added information about non-access user codes to the User Code
command class section.
1.3
Updated the Product ID description in the "Command Class
Manufacturer Specific" section.
1.4
Made the following updates:
•
Added interconnected locks: YRC216, YRC226, YRC256
•
Added configuration parameter 28 (expiration time) to the
Configurable Parameters table.
1.5
Made the following updates:
•
Provided Version Report example
•
Add mapping of Basic CC to Door Lock CC
•
Updated CC descriptions that required security
•
Updating Configuration Parameter Table
•
Fixed the Max Nodes for Association
•
Add information on how our Lock uses the Indicator feature
•
Add information how to trigger unsolicited AGI Lifeline reports
•
Add description of OTA internal step
•
Updated User Code User ID Status Values from CC v1 vs v2
•
Removed support for Clock CC
1.6
•
Added NF-YRD612, NF-YRD622, NF-YRC612, NF-YRC622 and
YRC652
•
Added SmartStart feature statement
1.7
•
Added YRD622, YRD642, YRC622 and YRC642
•
Expectations from User Code Set/Get vs Extended User Code
Set/Get Commands
1.8
•
Added YRD410/420/430/450
1.9
•
Added BLE Alarms from BLE locks
4
Advertisement
Table of Contents
