Redback A 4460 Operating Manual page 9

11.0 WALLPLATE SETTINGS MENU
Each wallplate has a settings menu which can be accessed using the icon on the top left of the screen (marked 1 in figure
3 & 4). Once in this menu the following screen will be displayed.
Adjust System
Backlight Actions
Colour Zone/Input
Scheme Locks
Activate
Set Time
Triggers
Adjust backlight - Allows you to select active brightness and dimmed brightness levels of the wallplate with the time out
period selectable for each level before the wallplate switches the screen off.
System actions - Allows you to choose settings for audible feedback on touch (on/off), screen rotation and wallplate/fac-
tory reset functions.
Set plate zone - Each wallplate in the system must have a unique zone. This setting allows you to enter the zone for the
plate you are using. On the master plate when set the words "Local Zone" will appear under the chosen zone name for
that wallplate.
Set access PIN - Set an optional access PIN preventing unauthorised access to the wallplates settings. Type in a preferred
PIN and press "E" to accept. Press "C" to delete pin digits or reset PIN.
Colour scheme - Set button colour scheme to preset red, blue or black/white. Note that other colour schemes may be
provided via future firmware updates.
MASTER WALLPLATE ONLY SETTINGS
Change labels - Allows you to set and change the custom labels for the output zones and audio sources.
Zone/input locks - Locks out selected zone wallplates or input audio sources from being used.
Input volume control - Sets system wide input sensitivity to cater for differing levels between audio sources.
Zone level & tone control - Allows you to set and change the bass and treble levels, triggers MP3 playback level and BT
output level.
Select global zone - Choose a zone from which the Bluetooth connection will be available to all zones ie: smartphone
streaming wireless audio at reception is available to all zones in the system.
Activate triggers - Allows manual playback of audio triggers including the connected hardware contacts on the rear
panel, plus software based triggers for MP3 audio playback.
Set time - Sets system wide time and date.
Set max volume - Allows you to set and change the maximum output levels for all zones.
www.redbackaudio.com.au
Set Plate Set Access
Zone PIN
Zone Level
Input Volume
& Tone
Control
Controls
Set Max
Zone Volume
Fig 5 - Wallplate Settings. Master (left), Zone (right).
Redback A 4460 4 x 8 Stereo Switcher
®
Change
Labels
Select
Global Zone
Back
Redback® Proudly Made In Australia
Adjust System
Backlight Actions
Set Plate
Set Access
Zone
PIN
Colour Screen
Scheme Lock
Tone Level
Control Control
Back
9