Page 1
A 4463 A 4464 Installation Manual Models A 4461 7” Master Wall Plate Black A 4462 4.3” Zone Wall Plate Black A 4463 7” Master Wall Plate White A 4464 4.3” Zone Wall Plate White Redback® Proudly Made In Australia Distributed by Altronic Distributors Pty.
Page 2
RJ45 Primary Connector This is used for the connection between the wallplate and the main controller such as the Redback A 4450 or A 4460. Connection is made using Cat5/6 cable to a maximum distance of 200m.
Page 3
“CONFIRM” / “CANCEL” choice, choose “CANCEL” and re-insert the SD card to try again. First Use Connect the wall plate to the Redback® master unit. This may be a newer product such as the A 4450 or A 4460 or an older supported legacy product (Refer to the Redback website for compatible products).
Page 4
With the wall plate connected as per the master unit instructions, power up the master unit. Step 1: A number of newer products (eg Redback® A4450, A4460, A 4650) support automatic detection, and this step will be automatically completed and user interaction skipped where available.