Redback
A 4460 4 x 8 Stereo Switcher
®
4.0 FRONT PANEL GUIDE
Fig 1 shows the layout of the A 4460 front panel.
1
Battery Backup
Coin battery CR2032 - requires XX hex driver to remove security plate.
2
Trigger LEDs 1-4
Turn on when a trigger input MP3 has been activated from the hardware triggers on the rear of the unit.
3
Comms LED
This LED indicates when the unit is communicating with wall plates.
4
Micro SD Card Slot
16GB Maximum.
5
Fault LED
This LED indicates when the unit has a fault with MP3 playback.
6
On Indicator
This LED indicates when the unit has power.
7
Standby Switch
When the unit is in standby mode this switch will illuminate red. Press this button to switch the unit ON. Once the
unit is ON the On indicator will illuminate blue. Press this switch again to put the unit back in standby mode.
4
Redback® Proudly Made In Australia
Trig 1
Active
Active
1
Fig 1
A 4460
Stereo Audio Switcher
Micro SD Card
Trig 2
Trig 3
Trig 4
Comms
Fault
16GB Maximum
Active
Active
2
3
4
5
www.redbackaudio.com.au
On
Power/
Standby
6 7