Product Description; Ce Label; Benchmark; Serial Number - Glow-worm EASICOM 25s Operating Instructions Manual

3 Product description

3.1 CE label

The CE label shows that the products
comply with the basic requirements of the
applicable directives as stated on the iden-
tification plate.
The declaration of conformity can be viewed
at the manufacturer's site.

3.2 Benchmark

Glow-worm is a licensed member of the
Benchmark Scheme.
Benchmark places responsibilities on both
manufacturers and installers. The purpose is
to ensure that customers are provided with
the correct equipment for their needs, that it
is installed, commissioned and serviced in
accordance with the manu-facturer's
instructions by a competent person
approved at the time by the Health and
Safety Executive and that it meets the
requirements of the appropriate Building
Regulations.
The Benchmark Checklist can be used to
demonstrate compliance with Building
Regulations and should be provided to the
customer for future reference. Installers are
required to carry out installation,
commissioning and servicing work in
accordance with the Benchmark Code of
Practice which is available from the Heating
and Hotwater Industry Council who manage
and promote the Scheme. Benchmark is
managed and promoted by the Heating and
Hotwater Industry Council.
For more information visit www.benchmark.org.uk.
0020238425_01 EASICOM Operating instructions
Notes on the documentation 2

3.3 Serial number

The serial number is located on the identi-
fication plate (1) and in the short operating
instructions (2) (→ Page 7).
3.4 Information on the
identification plate
The identification plate is mounted on the
underside of the product in the factory.
The identification plate keeps record of
the country in which the product is to be
installed.
Information
on the identi-
fication plate
Serial number
Easicom 3
XX, Gxx –
xx mbar
(x kPa)
Cat.
Condensing
technology
1 2
Meaning
Barcode with serial number
For quality control purposes;
3rd and 4th digits = year of
production
For quality control purposes;
5th and 6th digits = week of
production
For identification purposes;
7th to 16th digits = product
article number
For quality control purposes;
17th to 20th digits = place of
manufacture
Product description
Gas group and gas connec-
tion pressure as set at the
factory
Approved gas category
Efficiency of the boiler in
accordance with directive
92/42/EWG
7