3.7 Storage Drives
The CSE-418GT2S supports a total of 24 storage drives, which are mounted in drive carriers
and reside within the storage drive bays. These drives are hot-swappable and can be removed
or replaced without powering down the chassis. Enterprise NVMe, SAS or SATA drives only
are recommended.
Removing Drives and their Carriers from the Hard Drive Bays
1. Press the release button on the drive carrier. This extends the drive carrier handle.
2. Use the handle to pull the drive and its carrier out of the chassis.
Chapter 3: Maintenance and Component Installation
Figure 3-3. Removing a Hard Drive Carrier
58