Sinoboom TB28J Plus Operation Manual

Hide thumbs Also See for TB28J Plus:

Maintenance manual (174 pages)

Table Of Contents

100

101

102

103

104

page of 104

/ 104
Contents
Table of Contents
Bookmarks

Table of Contents

Quick Links

Download this manual

Part No.505070100002

Rev: C

Nov. 2022

Operation

Manual

产品说明书

PRODU

C T MAN U AL

TB28J Plus/TB910J Plus

0608E (2132E)

G T JZ

0808E (2732E)

G T JZ

0808E (2732E)

G T JZ

0808E (2732E)

Table of Contents

Need help?

Do you have a question about the TB28J Plus and is the answer not in the manual?

Questions and answers

Summary of Contents for Sinoboom TB28J Plus

Page 1 Operation Part No.505070100002 Rev: C Manual Nov. 2022 产品说明书 PRODU C T MAN U AL TB28J Plus/TB910J Plus 0608E (2132E) G T JZ 0808E (2732E) G T JZ 0808E (2732E) G T JZ G T JZ 0808E (2732E)
Page 3 Operating, servicing and maintaining this vehicle or equipment can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle or equipment in a well-ventilated area and wear gloves or wash your...
Page 4 : No.128, East Jinzhou Avenue, Ningxiang High-tech Industrial Park, Changsha, Hunan, China Zip Code : 410600 Copyright © Hunan Sinoboom Intelligent Equipment Co., Ltd. All Rights Reserved The final interpretation right of this manual belongs to Hunan Sinoboom Intelligent Equipment Co., Ltd.
Page 5 (See of the Operation Manual for details.) Trade Identification Model Serial No. Imperial Metric From 0507000513 to present TB28J Plus TB28J Plus TB910J Plus NOTE: • Product model is applied in product nameplate for distinction of products of different main parameters.
Page 6 This Page Intentionally Left Blank...
Page 7 This manual covers the basic parts information of one or more products. Therefore, please use this manual according to your needs. If you find problems in the manual or have suggestions for improve- ment, feel free to share your feedback with Sinoboom, and we will address these issues as soon as possible.
Page 8 This Page Intentionally Left Blank...
Page 9: Table Of Contents
Decals/Nameplates (GB) ..10-2 Inspecting the Battery ....5-6 TB28J Plus Operation Manual © Nov. 2022...
Page 10 Appendix 1: Symbols and Description....... A-1 Appendix 2: Prepare the Work Record Before Delivery ..A-3 Appendix 3: Repair & Inspection Report ......A-5 Appendix 4: Major Modification and Repair Record ..... A-9 © Nov. 2022 TB28J Plus Operation Manual...
Page 11: Introduction
The owner or administrator of the machine shall also provide the manufacturer’s maintenance information to the person responsible for maintaining the machine. If you have any questions, contact Hunan Sinoboom In- telligent Equipment Co., Ltd.. TB28J Plus Operation Manual © Nov. 2022...
Page 13: Machine Specifications
MACHINE SPECIFICATIONS Table 1-1 TB28J Plus specifications TB28J PLUS (METRIC) TB910J PLUS (IMPERIAL) MEASURE DIMENSION Max platform height 27.6 m 90 ft 7 in Max working height 29.6 m 97 ft 1 in Max horizontal reach (restricted/ 18 m/19.9 m...
Page 14 MACHINE SPECIFICATIONS Table 1-1 TB28J Plus specifications (continued) TB28J PLUS (METRIC) TB910J PLUS (IMPERIAL) MEASURE Turntable tail-swing 4 ft 9 in 1.45 m Max allowable inclination 5° Turning radius (inside) 3.65 m 12 ft Turning radius (outside) 6.91 m 22 ft 8 in...
Page 15 MACHINE SPECIFICATIONS Table 1-1 TB28J Plus specifications (continued) TB28J PLUS (METRIC) TB910J PLUS (IMPERIAL) MEASURE Gross weight (unladen) 17000 kg 37479 lb Note: a) The working height plus the operator height (taken as 2m/6ft 7in) is the platform height. b) The ground bearing data is approximate value, not factoring different options, thus it is applicable only in adequately safe conditions.
Page 16 MACHINE SPECIFICATIONS TB28J Plus range of motion Restricted Unrestricted © Nov. 2022 TB28J Plus Operation Manual...
Page 18 Boom Main boom rises to a position without exceeding 15° above the horizontal plane, and extends not exceeding 1.2m (3.9 ft). Operating/raised position: Main boom rises to a position exceeding 15° above the horizontal plane, or extends beyond 1.2m (3.9 ft). © Nov. 2022 TB28J Plus Operation Manual...
Page 19: Safety
Equipment Co., Ltd. by telephone and provide all nec- essary details. Failure to notify the manufacturer within 48 hours of the incident involving the machine of Hunan SAFETY DEFINITIONS Sinoboom Intelligent Equipment Co., Ltd. may void the product's warranty. This safety alert symbol appears with NOTICE most safety statements.
Page 20: Electrocution Hazards
Table 3-1 Minimum Safe Distance Voltage Minimum Safe Distance (Phase to Phase, kV) (m/ft) 0-50 3.05 (10) 50-200 4.60 (15) 200-350 6.10 (20) 350 -500 7.62 (25) 500 -750 10.67 (35) 750 -1000 13.725 (45) © Nov. 2022 TB28J Plus Operation Manual...
Page 21 Do not use the platform or boom ground, with gravel or other assembly to push other machines uneven surfaces, or near holes or objects. and steep slopes, maintain a minimum distance of 0.6m (2ft) and reduce the speed. TB28J Plus Operation Manual © Nov. 2022...
Page 22: Jobsite Hazards
12.5 m/s (28 mph). If the wind speed increases to beyond 12.5 m/s (28 mph) after the platform is lifted, fold the platform and stop operating the machine. © Nov. 2022 TB28J Plus Operation Manual...
Page 23 If the machine is to be used in any other applications, or by any other means, other than • Do not use any device that may those specified by Sinoboom, it must be approved or increase the wind load on the guided by the manufacturer. machine.
Page 24: Unsafe Operation Hazards
The battery not only provides power, but also serves as a counterweight. The battery is vital to maintaining the stability of the machine. © Nov. 2022 TB28J Plus Operation Manual...
Page 25: Fall Hazards
FALL HAZARDS At a minimum, operators must operate and maintain the machine as stated in the operation manual and in the maintenance manual in addition to following more stringent industry regulations and workplace rules. TB28J Plus Operation Manual © Nov. 2022...
Page 26: Crush Hazards
Set up roadblocks if necessary. • Limit the speed of travel according to ground conditions, crowding, gradients, the presence and location of personnel and any © Nov. 2022 TB28J Plus Operation Manual...
Page 27: Explosion And Fire Hazards
During operation, keep the left and right doors of the chassis closed and locked. Only trained service personnel can open the left and right doors to repair the machine. TB28J Plus Operation Manual © Nov. 2022...
Page 28: Battery Hazards
ELECTROCUTION HAZARD • Contact with hot circuit may cause serious injury or death. Be sure to wear goggles, gloves and protective clothing. • Remove all rings, watches and other accessories. © Nov. 2022 3-10 TB28J Plus Operation Manual...
Page 29 • Do not tamper with battery system to avoid serious accident. • Cut off the battery main switch if the battery is not to be used for an extended period. TB28J Plus Operation Manual 3-11 © Nov. 2022...
Page 30: Hydraulic Hazards
OFF position. 7. Turn the key switch at the ground controls to OFF position and remove the key to avoid unauthorized operation of the machine. 8. Turn off the main power switch. © Nov. 2022 3-12 TB28J Plus Operation Manual...
Page 31 SAFETY NOTICE After using the machine, the main power switch must be disconnected. TB28J Plus Operation Manual 3-13 © Nov. 2022...
Page 33: Jobsite Inspection
Operators must identify and avoid workplace hazards when mov- ing, installing and operating the machine. Unless approved by Sinoboom, never operate the ma- chine in a hazardous site. The following items present danger on the jobsite: •...
Page 35: Pre-Operation Inspection
Never use a machine that has damaged or modified be certified as a qualified operator in operation of parts. Mark the machine and stop using the this machine. machine if you discover damage or modifications. TB28J Plus Operation Manual © Nov. 2022...
Page 36: Conducting A Pre-Operation
If too high, the oil will spill out manifolds from the oil tank during machine operation, if too low, • Fuel tank and hydraulic tank the oil pump will suction air and damage hydraulic components. Performing daily inspection of the © Nov. 2022 TB28J Plus Operation Manual...
Page 37: Inspecting Fuel Level
Figure 5-3 cannot be mixed. 3. When the fuel level is less than or equal to 10%, the alarm will sound, make sure to add fuel to continue work. TB28J Plus Operation Manual © Nov. 2022...
Page 38: Inspecting Engine Oil Level
4. Move the engine start switch and idle it for 2 minutes. 5. Switch off the engine, and 5 minutes later open the turntable cover on the right side. 6. Remove the engine dipstick to inspect the engine oil level. © Nov. 2022 TB28J Plus Operation Manual...
Page 39: Inspecting Coolant Level （Water
The appropriate coolant level is vital to maintaining the below. engine performance and extending its service life, otherwise it will damage the engine parts. Through the daily check the inspector can know about the changes TB28J Plus Operation Manual © Nov. 2022...
Page 40: Inspecting The Battery
• Contact with live circuit may corrosion. cause serious injury or death. Be sure to wear goggles, gloves and protective clothing. • Remove all rings, watches and other jewelry. © Nov. 2022 TB28J Plus Operation Manual...
Page 41: Pre-Operation Function Test
All the function tests of the ground controller must be completed within the same cycle. Do not use a machine with problems or malfunctions. Mark the machine and do not use it if you discover any TB28J Plus Operation Manual © Nov. 2022...
Page 42 10. Turntable rotate switch (if equipped) 3. OFF position 11. Main boom telescope switch 19. Ground/Platform select switch 12. Jib up/down switch-TB28J Plus 20. Emergency stop button 4. Horn button only 5. Key switch 13. Jib rotate switch (not used) 21.
Page 43 18. Glow plug switch (if equipped) 10. Turntable rotate switch 3. OFF position 11. Main boom telescope switch 19. Ground/Platform select switch 12. Jib up/down switch-TB28J Plus 20. Emergency stop button 4. Horn button only 5. Key switch 13. Jib rotate switch (not used) 21.
Page 44 21. Heavy load indicator 9. Platform info 33. Overload limit 10. Alarm message 34. Drive limit (operating position) 22. Overload alarm 35. Drive and boom functions 23. Axle extended in place 11. Fault alarm allowed © Nov. 2022 TB28J Plus Operation Manual...
Page 45 3. Turn the key switch at the ground controller to ON position. 4. Ensure the relevant indicator light on the display should be on and no error should be present. Testing the horn TB28J Plus Operation Manual © Nov. 2022...
Page 46 FALL HAZARD normally. The platform leveling function is only Testing the main boom up/down switch used for slight adjustment of the platform. Improper operation may result in unintended movement or fall of the load/occupants. © Nov. 2022 TB28J Plus Operation Manual...
Page 47: Testing The Platform Controller
2. Move the enable switch and meanwhile move downwards the platform rotate switch, the platform should rotate clockwise. Testing the jib up/down switch-TB28J Plus After flipping the after-treatment regeneration disable only switch, the machine cannot enter the regeneration mode.
Page 48 2. Release switch 22. Engine high/low speed select 12. Main boom telescope direction (if equipped) switch 13. Jib rotate direction-TB28J Plus 23. Engine start switch 3. Platform level switch only (not used) 14. Hydraulic generator switch 4.Turntable rotate direction 24.
Page 49 Light ON indicates the platform controller is normally powered. Move the glow plug switch and hold it for 6-10s, the Horn button engine should take in air for preheating. TB28J Plus Operation Manual © Nov. 2022...
Page 50 2. Depress the foot switch and move backward the Drive/Steer control handle, the machine should drive reverse smoothly without noticeable impact in startup; when the handle is released, the machine should be held reliably. © Nov. 2022 6-10 TB28J Plus Operation Manual...
Page 51 Improper operation may result in unintended movement or fall Note: The turntable rotate speed is in direct proportion of the load/occupants. to the stroke of control handle. Main boom up/down TB28J Plus Operation Manual 6-11 © Nov. 2022...
Page 52 2. Depress the footswitch and move rightwards the platform rotate switch, the platform should rotate counterclockwise. Jib up/down switch-TB28J Plus only When the rear position indicator light is lit, the drive function should be inoperative. Move the rear position travel drive switch, the light shall be lit and the drive function should resume.
Page 53 When the footswitch is pressed down, the footswitch indicator light should be on. Platform tilt indicator light CAUTIO Heavy load indicator light TB28J Plus Operation Manual 6-13 © Nov. 2022...
Page 54: Testing The Drive Speed
6. The test results should be as shown in the table 2. Pull out the emergency stop buttons on both the below: ground and platform controllers to the ON position. © Nov. 2022 6-14 TB28J Plus Operation Manual...
Page 55: Testing The Tilt Protection System
Max boom up/down angle blocks. 1. Turn the Ground/Platform select switch at ground controls to the Ground. 2. Pull out the emergency stop button at the ground controls to ON position. TB28J Plus Operation Manual 6-15 © Nov. 2022...
Page 56: Testing The Weighing System
While performing override operation on the machine, please avoid operation in a dangerous direction. For overseas models, with the machine in the KG mode, if activating any function switch while flipping the © Nov. 2022 6-16 TB28J Plus Operation Manual...
Page 57 Before conducting any override operation, please make sure the surrounding area and the whole machine are in a safe state, try to avoid operation in a dangerous direction and ensure personal safety. TB28J Plus Operation Manual 6-17 © Nov. 2022...
Page 59: Operating The Machine
• Check the work site. tipping. • Check the safety decals/ nameplate on the machine. • Only use the machine according to the instructions in this manual and for its intended purpose. TB28J Plus Operation Manual © Nov. 2022...
Page 60 Boom fully extended; Boom kept horizontal; Turntable rotated 90°; The machine will tip over in the direction as indicated by the arrow if overloaded or operated beyond the limits of the maximum operating slope. © Nov. 2022 TB28J Plus Operation Manual...
Page 61: Emergency Stop
OFF, all the functions at the platform controls will get inoperative. • Push in the emergency stop button on the ground controller to OFF, all the functions at both the ground controls and platform controls will get inoperative. TB28J Plus Operation Manual © Nov. 2022...
Page 62: Emergency Lowering
When the platform or boom is caught overhead: If the platform or boom becomes jammed or snagged in overhead structures or equipment, rescue all people in the platform before freeing the machine. © Nov. 2022 TB28J Plus Operation Manual...
Page 63: Operation From Ground
Before applying any load, warm up the engine by running it at low speed for 3–5min. To position platform： 1. Move the enable switch and meanwhile move upwards/downwards the boom up/down switch to raise or lower the main boom. TB28J Plus Operation Manual © Nov. 2022...
Page 64: Operation From Platform
• If the engine fails to get started immediately, do or lower the jib boom (TB28J Plus only). not keep starting the engine for too long; if a restart still fails, allow the starter to cool down for To drive: 2–3min;...
Page 65: Driving On A Slope
6. Depress the footswitch and meanwhile move slope rating (5°). upwards/downwards the jib up/down switch to raise or lower the jib boom. (TB28J Plus) • Do not drive the machine across the slope exceeding the maximum To drive: side slope rating (14°).
Page 66 2. Measure the height H and length/distance L of the slope. Figure 7-5 3. Slope grade= H/L x 100%. NOTICE The machine must not drive for over 2min on the maximum permissible slope grade to prevent the tires running suspended. © Nov. 2022 TB28J Plus Operation Manual...
Page 67: Transporting And Lifting The Machine
When using a forklift or crane to lift the machine, prevent the machine from colliding with the nearby objects. • Lock the wheels of the machine after it has been loaded to prevent the machine from rolling. TB28J Plus Operation Manual © Nov. 2022...
Page 68: Lifting The Machine With A Crane
Adjust the rigging to avoid damage MACHINE to the machine and to keep the machine horizontal. NOTICE Follow these requirements when transporting the machine by truck or trailer: To protect the machine, choose the rigging with appropriate length. © Nov. 2022 TB28J Plus Operation Manual...
Page 69 3. Ensure the rope or belt is of sufficient capacity. platform and ensure the platform is suspended in the air. 4. Use at least 4 ropes/belts to fasten the chassis and one rope/belt for the platform. Figure 8-3 TB28J Plus Operation Manual © Nov. 2022...
Page 70 TRANSPORTING AND LIFTING THE MACHINE This Page Intentionally Left Blank © Nov. 2022 TB28J Plus Operation Manual...
Page 71: Maintenance
& counterbalance valve on the cylinder. inspection report and must complete the repair & inspection report. • Immediately remove a damaged or malfunctioning machine from service, mark and stop using it. TB28J Plus Operation Manual © Nov. 2022...
Page 72: Conducting A Pre-Delivery Inspection
Every half a year or every 500 volved. Use the table to help you adhere to a routine A+B+C hours maintenance schedule. Every year or every 1000 hours A+B+C+D © Nov. 2022 TB28J Plus Operation Manual...
Page 73: Completing A Repair & Inspection
A-9 Inspect Coolant Level (water-cooled engine) A-10 Inspect Engine Belt A-11 Inspect Fuel Strainer (fuel-water separator) A-12 Inspect Cooling Fan A-13 Inspect Engine Intake System A-14 Functional Tests A-15 Perform Maintenance after 30 Days TB28J Plus Operation Manual © Nov. 2022...
Page 74 Reducer Oil Level B-13 Inspect Slewing Bearing Bolts B-14 Lubricate Slewing Bearing B-15 Inspect Platform Rotate Cylinder Fasteners B-16 Test Cylinder Drift B-17 Inspect Counterbalance Valve Locking B-18 Inspect Electrical Wiring B-19 Inspect the Battery © Nov. 2022 TB28J Plus Operation Manual...
Page 75 Reducer Gear Oil D-3 Replace Hydraulic Oil D-4 Replace Hydraulic Tank Suction Filter D-5 Replace Coolant and Coolant Hoses (water-cooled engine) D-6 Replace Fuel Hoses D-7 Inspect Boom Wear Pads User Inspector Signature TB28J Plus Operation Manual © Nov. 2022...
Page 76: Major Modification And Repair Record
“Good” condition before company. continuing to use the machine. Table 9-4 Major Modification and Repair Record Model Serial No. Machine Repair- Repairman’s Status Problem Description Modification/Repair Item Date Company and Signature Position ter Change © Nov. 2022 TB28J Plus Operation Manual...
Page 79: Decals/Nameplates Inspection
Do not operate the engine if there are missing or badly worn safety labels. TB28J Plus Operation Manual 10-1 © Nov. 2022...
Page 80: Decals/Nameplates (Gb)
DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATES (GB) 21 22 环保信息代码打刻在此位置 13 14 1112 13 14 (33) 24 25 26 27 28 29 30 36 37 © Nov. 2022 10-2 TB28J Plus Operation Manual...
Page 81 Decal-Tipping hazard 103007103002 104011100019 Decal-Crush hazard 104011100017 Decal-Footswitch Decal-Range of motion chart 105070103000 104011100009 Decal-Read manuals 104011100021 Decal-Crush hazard Decal-Rated capacity 454kg 105046103004 Yellow-Black caution stripe 216060000002 Decal-Fuel-water separator 104009100020 104009100019 Decal-Diesel fuel TB28J Plus Operation Manual 10-3 © Nov. 2022...
Page 82 Description Qty. Part No. Remarks Decal-Hydraulic oil temperature range 104010100021 Decal-Hydraulic oil 104009100018 Decal-Hydraulic oil level 104011100010 Decal-Hydraulic oil level 104011100003 Decal-Direction marking 105001100051 Decal-Direction marking 105001100053 Environmental information code imprint position © Nov. 2022 10-4 TB28J Plus Operation Manual...
Page 83: Decals/Nameplates (Ce-Metric)
DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATES (CE-METRIC) 20 21 13 14 13 14 (32) 23 24 25 26 27 28 29 35 36 TB28J Plus Operation Manual 10-5 © Nov. 2022...
Page 84 104011100017 Decal-Foot switch Decal-Range of motion chart 105070103000 104011100009 Decal-Read manuals 104011100021 Decal-Crush hazard Decal-Rated load of 454kg 105046103004 Yellow-Black caution stripe 216060000002 Decal-Oil-water separator 104009100020 104009100021 Decal-Diesel oil Decal-Temperature range 104010100021 © Nov. 2022 10-6 TB28J Plus Operation Manual...
Page 85 DECALS/NAMEPLATES INSPECTION Description Qty. Part No. Remarks Decal-Hydraulic oil 104009100022 Decal-Hydraulic oil level 104011100010 Decal-Hydraulic oil level 104011100003 Decal-Direction marking 105001100051 Decal-Direction marking 105001100053 TB28J Plus Operation Manual 10-7 © Nov. 2022...
Page 86: Decals/Nameplates (Ce-Imperial)
DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATES (CE-IMPERIAL) 20 21 13 14 13 14 (32) 23 24 25 26 27 28 29 35 36 © Nov. 2022 10-8 TB28J Plus Operation Manual...
Page 87 104011100017 Decal-Foot switch Decal-Range of motion chart 105070103000 104011100009 Decal-Read manuals 104011100021 Decal-Crush hazard Decal-Rated load of 454kg 105046103004 Yellow-Black caution stripe 216060000002 Decal-Oil-water separator 104009100020 104009100021 Decal-Diesel oil Decal-Temperature range 104010100021 TB28J Plus Operation Manual 10-9 © Nov. 2022...
Page 88 DECALS/NAMEPLATES INSPECTION Description Qty. Part No. Remarks Decal-Hydraulic oil 104009100022 Decal-Hydraulic oil level 104011100010 Decal-Hydraulic oil level 104011100003 Decal-Direction marking 105001100051 Decal-Direction marking 105001100053 © Nov. 2022 10-10 TB28J Plus Operation Manual...
Page 89: Decals/Nameplates (Ansi)
DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATES (ANSI) 20 21 13 14 3 4 5 6 13 14 (32) 13 14 23 24 25 26 27 28 29 35 36 TB28J Plus Operation Manual 10-11 © Nov. 2022...
Page 90 104011100017 Decal-Foot switch Decal-Range of motion chart 105070103000 104011100009 Decal-Read manuals 104011100021 Decal-Crush hazard Decal-Rated load of 454kg 105046103004 Yellow-Black caution stripe 216060000002 Decal-Oil-water separator 104009100020 104009100021 Decal-Diesel oil Decal-Temperature range 104010100021 © Nov. 2022 10-12 TB28J Plus Operation Manual...
Page 91 DECALS/NAMEPLATES INSPECTION Description Qty. Part No. Remarks Decal-Hydraulic oil 104009100022 Decal-Hydraulic oil level 104011100010 Decal-Hydraulic oil level 104011100003 Decal-Direction marking 105001100051 Decal-Direction marking 105001100053 Decal-Annual inspection 101040103015 Decal-Operation instructions 105029103023 103010103014 Decal-Non-insulated TB28J Plus Operation Manual 10-13 © Nov. 2022...
Page 92: Decals/Nameplates (Csa)
DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATES (CSA) 20 21 13 14 3 4 5 6 13 14 (32) 13 14 23 24 25 26 27 28 29 35 36 © Nov. 2022 10-14 TB28J Plus Operation Manual...
Page 93 104011100017 Decal-Foot switch Decal-Range of motion chart 105070103000 104011100009 Decal-Read manuals 104011100021 Decal-Crush hazard Decal-Rated load of 454kg 105046103004 Yellow-Black caution stripe 216060000002 Decal-Oil-water separator 104009100020 104009100021 Decal-Diesel oil Decal-Temperature range 104010100021 TB28J Plus Operation Manual 10-15 © Nov. 2022...
Page 94 DECALS/NAMEPLATES INSPECTION Description Qty. Part No. Remarks Decal-Hydraulic oil 104009100022 Decal-Hydraulic oil level 104011100010 Decal-Hydraulic oil level 104011100003 Decal-Direction marking 105001100051 Decal-Direction marking 105001100053 Decal-Annual inspection 101040103015 Decal-Operation instructions 105029103023 103010103014 Decal-Non-insulated © Nov. 2022 10-16 TB28J Plus Operation Manual...
Page 95: Appendix 1: Symbols And Description
Never use machine Never use machine Never push or pull Never suspend objects Never place ladders during strong, gusty during strong, gusty objects outside from platform and scaffolding on the wind wind platform platform TB28J Plus Operation Manual © Nov. 2022...
Page 96 No smoking Lifting point Lashing points Tire to ground load Hydraulic oil filler Platform carrying Do not use damaged Tool or weight Fast/high speed Slow/low speed capacity cords Horn © Nov. 2022 TB28J Plus Operation Manual...
Page 97: Appendix 2: Prepare The Work Record Before Delivery
2. Use the table to record the results. After each section is complete, mark the appropriate box. 3. Record the inspection results. If any inspection results are "NO", the machine must be stopped, and re-in- spected after repair is completed and the box marked "inspection" must be checked. TB28J Plus Operation Manual © Nov. 2022...
Page 99: Appendix 3: Repair & Inspection Report
A-14 Functional Tests A-15 Perform Maintenance after 30 Days A-16 Perform Oscillate Cylinder Exhausting Checklist B Procedures REPAIRED/ YES/Machine is NO/Machine Has Problem Machine Has Items in Good Damage or Description Been Repaired Condition Malfunction TB28J Plus Operation Manual © Nov. 2022...
Page 100 B-17 Inspect Counterbalance Valve Locking B-18 Inspect Electrical Wiring B-19 Inspect the Battery B-20 Test Oscillate Outriggers B-21 Test Drive Speed B-22 Inspect Emergency Lowering B-23 Inspect Tilt Protection B-24 Test Braking Distance © Nov. 2022 TB28J Plus Operation Manual...
Page 101 D-3 Replace Hydraulic Oil D-4 Replace Hydraulic Tank Suction Filter D-5 Replace Coolant and Coolant Hoses (water-cooled engine) D-6 Replace Fuel Hoses D-7 Inspect Boom Wear Pads User Inspector Signature Inspection Date Inspector Title TB28J Plus Operation Manual © Nov. 2022...
Page 102 4. Record the inspection results. If any inspection item is marked as “NO”, the machine must be stopped and re- inspected after repair is completed and the box marked "REPAIRED” shall be checked. Select the appropriate inspection procedure based on the inspection type. © Nov. 2022 TB28J Plus Operation Manual...
Page 103: Appendix 4: Major Modification And Repair Record
Modification/Repair” in the form will be “Good” and the machine can be used. If either inspection result is “NO”, the machine must be re-inspected after the repair is completed until the machine is in “Good” condition before continuing to use the machine. TB28J Plus Operation Manual © Nov. 2022...
Page 104 Solution s Alw ays For B et t er A ccess Solution s Always for Better Access Solutions AS/N ZS Hunan Sinoboom Intelligent Equipment Co., Ltd. 长沙市宁乡高新技术产业园区金洲大道东 128 号 No.128, East Jinzhou Avenue, Ningxiang High-tech Industrial Park, Changsha, Hunan, China 市宁乡高新技术产业园区金洲大道东...

This manual is also suitable for:

Tb910j plus

Sinoboom TB28J Plus Operation Manual

Quick Links

Need help?

Questions and answers

Related Manuals for Sinoboom TB28J Plus

Summary of Contents for Sinoboom TB28J Plus

This manual is also suitable for:

Table of Contents