1. Manuals
  2. Brands
  3. Sinoboom Manuals
  4. Lifting Systems
  5. TB24E Plus
  6. Operation manual

Sinoboom TB24E Plus Operation Manual

Hide thumbs Also See for TB24E Plus:
Table of Contents

Advertisement

Quick Links

Download this manual
Part No.514004100002
Rev: A
Oct 2021
Operation
Manual
产品说明书
PRODU
C T MAN U AL
TB24E Plus/TB800E Plus
TB26EJ Plus/TB860EJ Plus
0608E (2132E)
G T JZ
TB26E Plus/TB850E Plus
0808E (2732E)
G T JZ
TB28EJ Plus/TB910EJ Plus
0808E (2732E)
G T JZ
G T JZ
0808E (2732E)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TB24E Plus and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Sinoboom TB24E Plus

Summary of Contents for Sinoboom TB24E Plus

  • Page 1 Operation Part No.514004100002 Rev: A Manual Oct 2021 产品说明书 PRODU C T MAN U AL TB24E Plus/TB800E Plus TB26EJ Plus/TB860EJ Plus 0608E (2132E) G T JZ TB26E Plus/TB850E Plus 0808E (2732E) G T JZ TB28EJ Plus/TB910EJ Plus 0808E (2732E) G T JZ...
  • Page 3 Operating, servicing and maintaining this vehicle or equipment can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle or equipment in a well-ventilated area and wear gloves or wash your...
  • Page 4 : No.128, East Jinzhou Avenue, Ningxiang High-tech Industrial Park, Changsha, Hunan, China Zip Code : 410600 Copyright © Hunan Sinoboom Intelligent Equipment Co., Ltd. All Rights Reserved The final interpretation right of this manual belongs to Hunan Sinoboom Intelligent Equipment Co., Ltd.
  • Page 5 Decals/Nameplate Inspection of the Operation Manual for details.) Trade Identification Model Serial No. Imperial Metric From 1400300100 to present TB24E Plus TB24E Plus TB800E Plus From 1400400100 to present TB26EJ Plus TB26EJ Plus TB860EJ Plus From 1401100100 to present...
  • Page 6 This Page Intentionally Left Blank...
  • Page 7 This manual covers the basic parts information of one or more products. Therefore, please use this manual according to your needs. If you find problems in the manual or have suggestions for improve- ment, feel free to share your feedback with Sinoboom, and we will address these issues as soon as possible.
  • Page 8 This Page Intentionally Left Blank...

  • Page 9: Table Of Contents

    Appendix 1: Symbols and Testing the Ground Controller ..6-1 Description....... A-1 Testing the Platform Controller ..6-6 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual © Oct 2021...
  • Page 10 Appendix 2: Prepare the Work Record Before Delivery ..A-3 Appendix 3: Repair & Inspection Report ......A-5 © Oct 2021 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...

  • Page 11: Introduction

    The owner or administrator of the machine shall also provide the manufacturer’s maintenance information to the person responsible for maintaining the machine. If you have any questions, contact Hunan Sinoboom In- telligent Equipment Co., Ltd.. TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...
  • Page 12 This Page Intentionally Left Blank © Oct 2021 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...

  • Page 13: Machine Specifications

    45%/24° Turntable tailswing 4ft 9in 1.45m Max allowable inclination 5° Turning radius (inside) 3.65m 12ft Turning radius (outside) 6.91m 22ft 8in Max allowable side force(restricted/ 600N/400N 135 lbf/90 lbf unrestricted) TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual © Oct 2021...
  • Page 14 Table 1-2 TB26EJ Plus specifications TB26EJ Plus (METRIC) TB860EJ Plus (IMPERIAL) MEASURE DIMENSION Max platform height 26.3m 86ft 3in Max working height 28.3m 92ft 10in Max horizontal reach (restricted/ 18.65m/20.6m 61ft 2in/67ft 7in unrestricted) © Oct 2021 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...
  • Page 15 IP65 POWER Motor (Volts/kW) 53V AC/15 kW Hydraulic tank capacity 37.4gal (UK)/44.9gal (US) 170L Hydraulic system pressure 21MPa 3045Psi 2×40V, 480Ah (lead-acid battery) Battery (number×voltage, capacity) 2×40V, 500Ah (lithium battery) TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual © Oct 2021...
  • Page 16 37ft 11in Overall width(stowed) 2.49m 8ft 2in Overall height (stowed) 2.88m 9ft 5in Wheelbase 9ft 10in Ground clearance 0.36m 1ft 2in Options Tire size (spec / type) 385/65-22.5 (foam-filled) 385/65-24/10.00 (solid) © Oct 2021 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...
  • Page 17 Power system voltage 80V DC Control system voltage 12V DC Charger (input voltage/output 100～240V AC/40 A current) GROUND BEARING DATA 9620kg Max tire load 21208 lb Pressure against ground 730kPa 105.9Psi ENVIRONMENT TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual © Oct 2021...
  • Page 18 454 kg (3 people & tools) 1000lb (3 people & tools) Rated platform capacity 300 kg (2 people & tools) 661 lb (2 people & tools) (unrestricted) Turntable rotation / continuous 360°/continuous Platform rotation 160° © Oct 2021 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...
  • Page 19 Max allowable RH Stored at -20℃ to 50℃(-4℉ to 122℉) in a well-ventilated environment with Storage environment 90% relative humidity (20℃ [68℉]), and away from rain, sun, corrosive gas,inflammables and explosives. TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual © Oct 2021...
  • Page 20 In cold weather, auxiliary devices are needed to start the machines. e) Rated platform capcity represents the rated load of the platform, including the loads of persons, materials, tools, platform accessories and other objects borne by the platform. © Oct 2021 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...
  • Page 21 MACHINE SPECIFICATIONS TB24E Plus range of motion (5°) 300kg (661lb) 454kg (1000lb) TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual © Oct 2021...
  • Page 22 MACHINE SPECIFICATIONS TB26EJ Plus range of motion (5°) 300kg (661lb) 454kg (1000lb) © Oct 2021 1-10 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...
  • Page 23 MACHINE SPECIFICATIONS TB28EJ Plus range of motion (5°) 300kg (661lb) 454kg (1000lb) TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual 1-11 © Oct 2021...
  • Page 24 MACHINE SPECIFICATIONS This Page Intentionally Left Blank © Oct 2021 1-12 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...

  • Page 25: Machine Components

    MACHINE COMPONENTS 28 29 30 17 18 19 22 23 24 40 41 Figure 2-1 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual © Oct 2021...
  • Page 26 Boom lowers and retracts in place. Non-operating position： Boom rises at an angle not exceeding 15°, and extends not exceeding 1.2m. Operating/raised position： Boom rises at an angle exceeding 15°, or extends beyond 1.2m. © Oct 2021 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...

  • Page 27: Safety

    Ensure the machine's lifting height does not exceed 3 m(9.8 ft) until all damage has been repaired and all controllers operate properly. TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual © Oct 2021...

  • Page 28: Electrocution Hazards

    Voltage Minimum Safe Distance (Phase to Phase, kV) (m/ft) 0-50 3.05 (10) 50-200 4.60 (15) 200-350 6.10 (20) 350 -500 7.62 (25) 500 -750 10.67 (35) 750 -1000 13.725 (45) © Oct 2021 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...
  • Page 29 • Do not use the platform or boom minimum distance of 0.6m (2ft) assembly to push other machines and reduce the speed. or objects. TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual © Oct 2021...

  • Page 30: Jobsite Hazards

    Do not lift the platform when the wind speed exceeds 12.5 m/s (28 mph). If the wind speed exceeds 12.5 m/s (28 mph) after the platform is lifted, © Oct 2021 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...
  • Page 31 If the machine is used in any other applications, or by any other means, as specified by fold the platform and do not Sinoboom, it must be approved or guided by the continue to operate the machine. manufacturer.

  • Page 32: Unsafe Operation Hazards

    The battery is vital to maintaining the stability of the machine. • Do not place or attach any suspended load onto any part of the machine. © Oct 2021 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...

  • Page 33: Fall Hazards

    Maintenance Manual in addition to following more maintenance manual in addition to following more stringent industry regulations and workplace rules. stringent industry regulations and workplace rules. TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual © Oct 2021...

  • Page 34: Crush Hazards

    • Limit the speed of travel according to ground conditions, crowding, gradients, the presence and location of personnel and any © Oct 2021 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...

  • Page 35: Explosion And Fire Hazards

    During operation, keep the left and right doors of the chassis closed and locked. Only trained service personnel can open the left and right doors to repair the machine. TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual © Oct 2021...

  • Page 36: Battery Hazards

    ELECTROCUTION HAZARD • Contact with hot circuit may cause serious injury or death. Be sure to wear goggles, gloves and protective clothing. • Remove all rings, watches and other accessories. © Oct 2021 3-10 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...
  • Page 37 Do not tamper with battery system to avoid serious accident. • Cut off the battery main switch if the battery is not to be used for an extended period. TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual 3-11 © Oct 2021...

  • Page 38: Hydraulic Hazards

    7. Turn the key switch at the ground controls to OFF position and remove the key to avoid unauthorized operation of the machine. 8. Turn off the main power switch. © Oct 2021 3-12 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...
  • Page 39 SAFETY NOTICE After using the machine, the main power switch must be disconnected. TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual 3-13 © Oct 2021...
  • Page 40 SAFETY This Page Intentionally Left Blank © Oct 2021 3-14 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...

  • Page 41: Jobsite Inspection

    Operators must identify and avoid workplace hazards when mov- ing, installing and operating the machine. Unless approved by Sinoboom, never operate the ma- chine in a hazardous site. The following items present danger on the jobsite: •...
  • Page 42 JOBSITE INSPECTION This Page Intentionally Left Blank © Oct 2021 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...

  • Page 43: Pre-Operation Inspection

    Never use a machine that has damaged or modified be certified as a qualified operator in operation of parts. Mark the machine and stop using the this machine. machine if you discover damage or modifications. TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual © Oct 2021...

  • Page 44: Inspecting Parts

    INSPECTING ENTIRE 3. Add oil as needed. Never overfill the tank. MACHINE Inspect the entire machine for: • Cracks in a weld joint or structural part © Oct 2021 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...

  • Page 45: Inspecting The Battery

    • Remove all rings, watches and insulated. other jewelry. Note:Adding terminal protectors or applying anti- corrosion agent will help the terminals and cables from corrosion. TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual © Oct 2021...
  • Page 46 PRE-OPERATION INSPECTION This Page Intentionally Left Blank © Oct 2021 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...

  • Page 47: Pre-Operation Function Test

    All the function tests of ground controller must be completed within a cycle. Do not use a machine with problems or malfunctions. Mark the machine and do not use it if you discover any TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual © Oct 2021...
  • Page 48 13. Jib rotate switch-not used 22. Ground control position 6. Enable switch 14. Platform rotate switch 7. Emergency power switch 15. Platform level switch 8. Not used 16. Not used © Oct 2021 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...
  • Page 49 21. Heavy load indicator 9. Platform info 33. Overload limit 10. Alarm message 34. Drive limit (operating position) 22. Overload alarm 35. Drive and boom functions 11. Fault alarm 23. Not used allowed TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual © Oct 2021...
  • Page 50 3. Turn the key switch at the ground controls to ON Enable switch position. 4. Ensure the relevant indicator light on the display should be on and no error should be present. Horn button © Oct 2021 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...
  • Page 51 2. Move the enable switch and meanwhile move Emergency power switch rightwards the turntable rotate switch, the turntable should rotate clockwise. Platform level switch TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual © Oct 2021...

  • Page 52: Testing The Platform Controller

    Move both the emergency power switch and each function switch/handle, the corresponding function should operate normally. TESTING THE PLATFORM CONTROLLER NOTICE All the tests of platform controllers should be completed within a cycle. © Oct 2021 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...
  • Page 53 8. Platform rotate switch 18. Steer direction 9. Not used 19. Drive/steer control handle 29. Horn button 10. Jib up/down switch-TB26EJ 20. Drive direction 30. Buzzer button Plus&28EJ Plus only TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual © Oct 2021...
  • Page 54 ON position, and then move the engine start Power indicator light switch, the engine should fail to start and all functions should be inoperative. Drive function Light on inidcates the platform controller is normally powered. Horn button © Oct 2021 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...
  • Page 55 Drive high/low speed select switch without shaking or abnormal noise, and the buzzer should sound. Note：The main boom up/down speed is in positive proportion to the stroke of control handle. Main boom telescope TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual © Oct 2021...
  • Page 56 • When the emergency power is in use, do not of the load/occupants. operate two or more functions simultaneously, otherwise the auxiliary motor and pump will get overloaded. © Oct 2021 6-10 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...
  • Page 57 Move the work light switch, the work light should be on/off. When the load on the platform exceeds the rated Buzzer platform capacity, the overload indicator light should CAUTION be on. TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual 6-11 © Oct 2021...

  • Page 58: Testing The Drive Speed

    When the machine drives at high speed, the drive 3. Turn the key switch on the ground controller to the high speed indicator light should be on. ON position. © Oct 2021 6-12 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...

  • Page 59: Testing The Tilt Protection System

    With the machine in operating position, drive it onto the two wooden blocks. 10. The tilt alarm should sound with the chassis tilt indicator light flashing, some functions are TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual 6-13 © Oct 2021...

  • Page 60: Testing The Weighing System

    TB26EJ Plus：when the boom extends to the pulley and track are adequately lubricated. farthest(the ground display reads 18.65m of © Oct 2021 6-14 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...
  • Page 61 All motion functions will not resume until the excessive load is removed. TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual 6-15 © Oct 2021...
  • Page 62 PRE-OPERATION FUNCTION TEST This Page Intentionally Left Blank © Oct 2021 6-16 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...

  • Page 63: Operating The Machine

    Check the work site. tipping. • Check the safety decals/ nameplate on the machine. • Only use the machine according to the instructions in this manual and for its intended purpose. TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual © Oct 2021...
  • Page 64 Boom kept horizontal; Turntable rotated 90°; The machine will tip over in the direction as indicated by the arrow if overloaded or operated beyond the limits of the maximum operating slope. © Oct 2021 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...

  • Page 65: Emergency Stop

    • Push the power disconnect switch on the left side of chassis to OFF, the system power will be disconnected and all functions will get inoperative. TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual © Oct 2021...

  • Page 66: Emergency Lowering

    When the platform or boom is caught overhead： If the platform or boom becomes jammed or snagged in overhead structures or equipment, rescue all people in the platform before freeing the machine. © Oct 2021 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...

  • Page 67: Operation From Ground

    4. Move the enable switch and meanwhile move upwards/downwards the platform level switch to level up or down the platform. TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual © Oct 2021...

  • Page 68: Operation From Platform

    3. Speed down：slowly move the joystick toward the area around or under the platform center. is free of persons or obstacles. 4. Stop：return the joystick to center or release the footswitch. © Oct 2021 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...

  • Page 69: Driving On A Slope

    1. Determine the gradeability (climbing ability) of the 3. Slope grade= H/L x 100%. machine. NOTICE The machine must not drive for over 2min on the maximum permissible slope grade to prevent the tires running suspended. TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual © Oct 2021...

  • Page 70: Charging The Battery

    -20℃~45℃. Charging the lead acid battery requiring maintenance 1. Disconnect the cables wiring the battery to the machine. 2. Remove the vent cap of the lead acid battery. © Oct 2021 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...
  • Page 71 3. Disconnect the charger from the AC circuit. 4. ire the battery to the machine, and the machine is ready for use. TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual © Oct 2021...
  • Page 72 OPERATING THE MACHINE This Page Intentionally Left Blank © Oct 2021 7-10 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...

  • Page 73: Transporting And Lifting The Machine

    • Lock the wheels of the machine after it has been installed to prevent the machine from rolling. TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual © Oct 2021...

  • Page 74: Lifting The Machine With A Crane

    (11.3 in) 1234 mm 1359 mm 1234 mm 1359 mm (48.6 in) (53.5 in) (48.6 in) (53.5 in) 6. Lift the machine as shown in the figure below. Figure 8-2 © Oct 2021 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...

  • Page 75: Transporting The Machine

    It is recommended to add a foam layer beneath the platform and ensure the platform is suspended in Follow these requirements when transporting the the air. machine by truck or trailer: TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual © Oct 2021...
  • Page 76 TRANSPORTING AND LIFTING THE MACHINE Figure 8-3 © Oct 2021 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...

  • Page 77: Decals/Nameplates Inspection

    Do not operate the engine if there are missing or badly worn safety labels. TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual © Oct 2021...

  • Page 78: Decals/Nameplates(Gb)

    DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATES(GB) (16) 26 27 14 13 19 20 (37) (29) © Oct 2021 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...
  • Page 79 Decal-Tipping hazard 103007103002 Decal-Tipping hazard 105021100003 104011100019 Decal-Crush hazard 104011100009 Decal-Read manuals 104011100017 Decal-Footswitch 104011100021 Decal-Crush hazard 101012100010 Decal-Electrocution hazard Decal-Charging voltage 101023100012 Decal-Rated load 454kg 105046103004 Yellow-Black caution stripe 216060000002 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual © Oct 2021...
  • Page 80 Blind rivet 3×8-ZnD Decal-Direction marking 105001100051 101012100001 Decal-No fire Decal-Direction marking 105001100053 Decal-Range of motion 114003103001 TB24E Plus Decal-Range of motion 114004103002 TB26EJ Plus Decal-Range of motion 114007103000 TB28EJ Plus © Oct 2021 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...

  • Page 81: Decals/Nameplates(Ce-Metric)

    DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATES(CE-METRIC) (16) 14 13 19 20 (37) (29) TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual © Oct 2021...
  • Page 82 Decal-Tipping hazard 103007103002 Decal-Tipping hazard 105021100003 104011100019 Decal-Crush hazard 104011100009 Decal-Read manuals 104011100017 Decal-Footswitch 104011100021 Decal-Crush hazard 101012100010 Decal-Electrocution hazard Decal-Charging voltage 101012100014 Decal-Rated load 454kg 105046103004 Yellow-Black caution stripe 216060000002 © Oct 2021 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...
  • Page 83 Blind rivet 3×8-ZnD Decal-Direction marking 105001100051 101012100001 Decal-No fire Decal-Direction marking 105001100053 Decal-Range of motion 114003103001 TB24E Plus Decal-Range of motion 104004103002 TB26EJ Plus Decal-Range of motion 114007103000 TB28EJ Plus TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual © Oct 2021...

  • Page 84: Decals/Nameplates(Ce-Imperial)

    DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATES(CE-IMPERIAL) (16) 14 13 19 20 (37) (29) © Oct 2021 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...
  • Page 85 Decal-Tipping hazard 103007103002 Decal-Tipping hazard 105021100003 104011100019 Decal-Crush hazard 104011100009 Decal-Read manuals 104011100017 Decal-Footswitch 104011100021 Decal-Crush hazard 101012100010 Decal-Electrocution hazard Decal-Charging voltage 101012100014 Decal-Rated load 454kg 105046103004 Yellow-Black caution stripe 216060000002 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual © Oct 2021...
  • Page 86 Blind rivet 3×8-ZnD Decal-Direction marking 105001100051 101012100001 Decal-No fire Decal-Direction marking 105001100053 Decal-Range of motion 114003103001 TB24E Plus Decal-Range of motion 104004103002 TB26EJ Plus Decal-Range of motion 114007103000 TB28EJ Plus © Oct 2021 9-10 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...

  • Page 87: Decals/Nameplates(Ansi)

    DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATES(ANSI) 14 13 (16) 14 13 19 20 (37) (29) TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual 9-11 © Oct 2021...
  • Page 88 103007103002 Decal-Tipping hazard 105021100003 104011100019 Decal-Crush hazard 104011100009 Decal-Read manuals 104011100017 Decal-Footswitch 104011100021 Decal-Crush hazard 101012100010 Decal-Electrocution hazard Decal-Charging voltage 101012100014 Decal-Rated load 454kg 105046103004 Yellow-Black caution stripe 216060000002 © Oct 2021 9-12 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...
  • Page 89 Decal-No fire Decal-Direction marking 105001100053 Decal-Range of motion 114003103001 TB24E Plus Decal-Range of motion 104004103002 TB26EJ Plus Decal-Range of motion 114007103000 TB28EJ Plus Decal-Annual inspection 101040103015 Decal-Operating instructions 105029103023 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual 9-13 © Oct 2021...

  • Page 90: Decals/Nameplates (Csa)

    DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATES (CSA) 14 13 (16) 14 13 19 20 (41) (37) (29) © Oct 2021 9-14 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...
  • Page 91 103007103002 Decal-Tipping hazard 105021100003 104011100019 Decal-Crush hazard 104011100009 Decal-Read manuals 104011100017 Decal-Footswitch 104011100021 Decal-Crush hazard 101012100010 Decal-Electrocution hazard Decal-Charging voltage 101012100014 Decal-Rated load 454kg 105046103004 Yellow-Black caution stripe 216060000002 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual 9-15 © Oct 2021...
  • Page 92 Decal-No fire Decal-Direction marking 105001100053 Decal-Range of motion 114003103001 TB24E Plus Decal-Range of motion 104004103002 TB26EJ Plus Decal-Range of motion 114007103000 TB28EJ Plus Decal-Annual inspection 101040103015 Decal-Operating instructions 105029103023 © Oct 2021 9-16 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...

  • Page 93: Maintenance

    TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual 10-1 © Oct 2021...

  • Page 94: Following Amaintenance Schedule

    A+B+C hours in the box marked "inspection". Select the appropriate inspection procedure based on the Every year or every 1000 hours A+B+C+D inspection type. © Oct 2021 10-2 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...
  • Page 95 B-5 Inspect Emergency Lowering B-6 Inspect Air filter of Hydraulic Tank B-7 Replace High-Pressure Filter Element B-8 Test Drive Speed B-9 Inspect Length and Angle Sensors B-10 Inspect Tilt Protection TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual 10-3 © Oct 2021...
  • Page 96 D-1 Replace Drive Reducer Gear Oil D-2 Replace Slewing Reducer Gear Oil D-3 Replace Hydraulic Oil D-4 Replace Hydraulic Tank Suction Filter D-5 Inpsect Boom Wear Pads User Inspector Signature © Oct 2021 10-4 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...
  • Page 97 MAINTENANCE REPAIR & INSPECTION REPORT Inspector Date Inspector Title Inspector Company TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual 10-5 © Oct 2021...
  • Page 98 MAINTENANCE This Page Intentionally Left Blank © Oct 2021 10-6 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...

  • Page 99: Appendix 1: Symbols And Description

    Electrocution hazards Electrocution hazards Tip-over hazards-Avoid Tip-over hazards-Avoid Tip-over hazards- on platform on the ground and uneven ground uneven ground Never use machine platform during strong, gusty wind TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual © Oct 2021...
  • Page 100 The side force Electrocution hazards Fast/high speed Slow/low speed Horn Improve point Lashing points Tire to ground load Hydraulic oil filler Platform carrying capacity Do not use damaged Tool or weight cords © Oct 2021 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...
  • Page 101 3. Record the inspection results. If any inspection results are "NO", the machine must be stopped and re- inspected after repair is completed and marked in the box marked "inspection". TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual © Oct 2021...
  • Page 102 MAINTENANCE This Page Intentionally Left Blank © Oct 2021 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...
  • Page 103 B-2 Inspect Rim ,Tire and Fasteners B-3 Inspect Hydraulic Oil B-4 Inspect Electrical Wiring B-5 Inspect Emergency Lowering B-6 Inspect Air filter of Hydraulic Tank B-7 Replace High-Pressure Filter Element TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual © Oct 2021...
  • Page 104 Good Damage or Description Been Repaired Condition Malfunction D-1 Replace Drive Reducer Gear Oil D-2 Replace Slewing Reducer Gear Oil D-3 Replace Hydraulic Oil D-4 Replace Hydraulic Tank Suction Filter © Oct 2021 TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual...
  • Page 105 "inspection". Select the appropriate inspection procedure based on the inspection type. Select the appropriate inspection procedure based on the inspection type. TB24E Plus&26EJ Plus&26E Plus&28EJ Plus Operation Manual © Oct 2021...
  • Page 106 Solution s Alw ays For B et t er A ccess Solution s Always for Better Access Solutions AS/N ZS Hunan Sinoboom Intelligent Equipment Co., Ltd. 长沙市宁乡高新技术产业园区金洲大道东 128 号 No.128, East Jinzhou Avenue, Ningxiang High-tech Industrial Park, Changsha, Hunan, China 市宁乡高新技术产业园区金洲大道东...

This manual is also suitable for:

Tb800e plusTb26ej plusTb860ej plusTb26e plusTb850e plusTb28ej plus ... Show all

Table of Contents