Sinoboom TB26EJ Plus Operation Manual

Hide thumbs Also See for TB26EJ Plus:

Maintenance manual (114 pages)

Operation manual (106 pages)

Maintenance manual (156 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

109

110

page of 110

/ 110
Contents
Table of Contents
Bookmarks

Table of Contents

Quick Links

Download this manual

Part No.514004100002

Rev: C

Nov. 2022

Operation

Manual

产品说明书

PRODU

C T MAN U AL

TB26EJ Plus/TB860EJ Plus

TB28EJ Plus/TB910EJ Plus

0608E (2132E)

G T JZ

0808E (2732E)

G T JZ

0808E (2732E)

G T JZ

0808E (2732E)

Table of Contents

Need help?

Do you have a question about the TB26EJ Plus and is the answer not in the manual?

Questions and answers

Summary of Contents for Sinoboom TB26EJ Plus

Page 1 Operation Part No.514004100002 Rev: C Manual Nov. 2022 产品说明书 PRODU C T MAN U AL TB26EJ Plus/TB860EJ Plus TB28EJ Plus/TB910EJ Plus 0608E (2132E) G T JZ 0808E (2732E) G T JZ 0808E (2732E) G T JZ G T JZ 0808E (2732E)
Page 3 Operating, servicing and maintaining this vehicle or equipment can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle or equipment in a well-ventilated area and wear gloves or wash your...
Page 4 : No.128, East Jinzhou Avenue, Ningxiang High-tech Industrial Park, Changsha, Hunan, China Zip Code : 410600 Copyright © Hunan Sinoboom Intelligent Equipment Co., Ltd. All Rights Reserved The final interpretation right of this manual belongs to Hunan Sinoboom Intelligent Equipment Co., Ltd.
Page 5 See the nameplate on your machine to identify the model and serial number. (See Decals/Nameplate Inspection of the Operation Manual for details.) Trade Identification Model Serial No. Imperial Metric From 1400400231 to present TB26EJ Plus TB26EJ Plus TB860EJ Plus From 1400700274 to present TB28EJ Plus TB28EJ Plus TB910EJ Plus NOTE: •...
Page 6 This Page Intentionally Left Blank...
Page 7 This manual covers the basic parts information of one or more products. Therefore, please use this manual according to your needs. If you find problems in the manual or have suggestions for improve- ment, feel free to share your feedback with Sinoboom, and we will address these issues as soon as possible.
Page 8 This Page Intentionally Left Blank...
Page 9: Table Of Contents
Check Battery Level....5-4 Inspection ....... 10-1 6 Pre-operation Function Test .. 6-1 Decals/Nameplates (GB) ..10-2 TB26EJ Plus&28EJ Plus Operation Manual © Nov. 2022...
Page 10 Appendix 1: Symbols and Description....... A-1 Appendix 2: Prepare the Work Record Before Delivery ..A-3 Appendix 3: Repair & Inspection Report ......A-5 Appendix 4: Major Modification and Repair Record ..... A-9 © Nov. 2022 TB26EJ Plus&28EJ Plus Operation Manual...
Page 11: Introduction
The owner or administrator of the machine shall also provide the manufacturer’s maintenance information to the person responsible for maintaining the machine. If you have any questions, contact Hunan Sinoboom In- telligent Equipment Co., Ltd.. TB26EJ Plus&28EJ Plus Operation Manual...
Page 13: Machine Specifications
MACHINE SPECIFICATIONS Table 1-1 TB26EJ Plus specifications TB26EJ Plus (METRIC) TB860EJ Plus (IMPERIAL) ITEMS DIMENSION Max platform height 26.3m 86ft 3in Max working height 28.3m 92ft 10in Max horizontal reach (restricted/ 18.65m/20.6m 61ft 2in/67ft 7in unrestricted) Max horizontal working envelope 19.26m/21.2m...
Page 14 MACHINE SPECIFICATIONS Table 1-1 TB26EJ Plus specifications (continued) TB26EJ Plus (METRIC) TB860EJ Plus (IMPERIAL) ITEMS Turning radius (inside) 3.65m 12 ft Turning radius (outside) 6.91m 22ft 8in Max allowable side force 400N 90 lbf Max operating noise level 79dB IP rating...
Page 15 Max drive speed (raised) 0.68 mph 1.1km/h Drive mode (drive×steer) 4WD×2WS Gradeability 45%/24° Turntable tailswing 4ft 9in 1.45m Max allowable inclination 5° Turning radius (inside) 3.65m 12 ft Turning radius (outside) 6.91m 22ft 8in TB26EJ Plus&28EJ Plus Operation Manual © Nov. 2022...
Page 16 Max allowable RH Stored at -20℃ to 50℃ (-4℉ to 122℉) in a well-ventilated environment with Storage environment 90% relative humidity (20℃ [68℉]), and away from rain, sun, corrosive gas, inflammables and explosives. WEIGHT © Nov. 2022 TB26EJ Plus&28EJ Plus Operation Manual...
Page 17 0.5m/s². g) It is recommended not to use lead-acid batteries in environments below 0 °C, otherwise the battery capacity will decay rapidly and the battery life will be affected. TB26EJ Plus&28EJ Plus Operation Manual © Nov. 2022...
Page 18 MACHINE SPECIFICATIONS TB26EJ Plus chart of working envelope (5°) 300kg (661lb) 454kg (1000lb) © Nov. 2022 TB26EJ Plus&28EJ Plus Operation Manual...
Page 19 MACHINE SPECIFICATIONS TB28EJ Plus chart of working envelope (5°) 300kg (661lb) 454kg (1000lb) TB26EJ Plus&28EJ Plus Operation Manual © Nov. 2022...
Page 21: Machine Components
MACHINE COMPONENTS 28 29 30 17 18 19 22 23 24 Figure 2-1 TB26EJ Plus&28EJ Plus Operation Manual © Nov. 2022...
Page 22 Non-operating position: Boom rises at an angle not exceeding 15°, and extends not exceeding 1.2m (3.9 ft). Operating/raised position: Boom rises at an angle exceeding 15°, or extends beyond 1.2m (3.9 ft). © Nov. 2022 TB26EJ Plus&28EJ Plus Operation Manual...
Page 23: Safety
In case of any accident involving the machinery of Also, people who have alcohol or drugs in their Hunan Sinoboom Intelligent Equipment Co., Ltd., notify system, or experience excessive fatigue or Hunan Sinoboom Intelligent Equipment Co., Ltd.
Page 24: Electrocution Hazards
Table 3-1 Minimum Safe Distance Voltage Minimum Safe Distance (Phase to Phase, kV) (m/ft) 0-50 3.05 (10) 50-200 4.60 (15) 200-350 6.10 (20) 350 -500 7.62 (25) 500 -750 10.67 (35) 750 -1000 13.725 (45) © Nov. 2022 TB26EJ Plus&28EJ Plus Operation Manual...
Page 25 Do not use the platform or boom uneven surfaces, or near holes assembly to push other machines and steep slopes, maintain a or objects. minimum distance of 0.6m (2ft) and reduce the speed. TB26EJ Plus&28EJ Plus Operation Manual © Nov. 2022...
Page 26: Jobsite Hazards
Do not lift the platform when the wind speed exceeds 12.5 m/s (28 mph). If the wind speed increases to beyond 12.5 m/s (28 mph) after the © Nov. 2022 TB26EJ Plus&28EJ Plus Operation Manual...
Page 27 If the machine is to be used in any other applications, or by any other means, other than platform is lifted, fold the platform those specified by Sinoboom, it must be approved or and stop operating the machine. guided by the manufacturer.
Page 28: Unsafe Operation Hazards
The battery not only provides power, but also serves as a counterweight. The battery is vital to maintaining the stability of the machine. © Nov. 2022 TB26EJ Plus&28EJ Plus Operation Manual...
Page 29: Fall Hazards
At a minimum, operators must operate and maintain the machine as stated in the operation manual and in the maintenance manual in addition to following more stringent industry regulations and workplace rules. TB26EJ Plus&28EJ Plus Operation Manual © Nov. 2022...
Page 30: Crush Hazards
Set up roadblocks if necessary. • Limit the speed of travel according to ground conditions, crowding, gradients, the presence and location of personnel and any © Nov. 2022 TB26EJ Plus&28EJ Plus Operation Manual...
Page 31: Explosion And Fire Hazards
During operation, keep the left and right doors of the chassis closed and locked. Only trained service personnel can open the left and right doors to repair the machine. TB26EJ Plus&28EJ Plus Operation Manual © Nov. 2022...
Page 32: Battery Hazards
ELECTROCUTION HAZARD • Contact with hot circuit may cause serious injury or death. Be sure to wear goggles, gloves and protective clothing. • Remove all rings, watches and other accessories. © Nov. 2022 3-10 TB26EJ Plus&28EJ Plus Operation Manual...
Page 33 • Do not tamper with battery system to avoid serious accident. • Cut off the battery main switch if the battery is not to be used for an extended period. TB26EJ Plus&28EJ Plus Operation Manual 3-11 © Nov. 2022...
Page 34: Hydraulic Hazards
OFF position. 7. Turn the key switch at the ground controls to OFF position and remove the key to avoid unauthorized operation of the machine. 8. Turn off the main power switch. © Nov. 2022 3-12 TB26EJ Plus&28EJ Plus Operation Manual...
Page 35 SAFETY NOTICE After using the machine, the power off switch must be disconnected. TB26EJ Plus&28EJ Plus Operation Manual 3-13 © Nov. 2022...
Page 37: Jobsite Inspection
Operators must identify and avoid workplace hazards when mov- ing, installing and operating the machine. Unless approved by Sinoboom, never operate the ma- chine in a hazardous site. The following items present danger on the jobsite: •...
Page 39: Pre-Operation Inspection
Never use a machine that has damaged or modified be certified as a qualified operator in operation of parts. Mark the machine and stop using the this machine. machine if you discover damage or modifications. TB26EJ Plus&28EJ Plus Operation Manual © Nov. 2022...
Page 40: Conducting A Pre-Operation
• Tires and rims range of oil level indicator. • Alarms and lighting (if equipped) • Platform (including rails, floor plate, safety lock, brackets and entry door) © Nov. 2022 TB26EJ Plus&28EJ Plus Operation Manual...
Page 41: Inspecting The Battery
• Check the battery box for accumulation of water, and if any, clear the water. TB26EJ Plus&28EJ Plus Operation Manual © Nov. 2022...
Page 42: Check Battery Level
Figure 5-3 NOTICE When the battery level is about 20%, the battery must be charged. It is forbidden to charge the battery after the it runs out. © Nov. 2022 TB26EJ Plus&28EJ Plus Operation Manual...
Page 43: Pre-Operation Function Test
All the functional tests of the ground controller must be completed within one cycle. Do not use a machine with problems or malfunctions. Mark the machine and do not use it if you discover any TB26EJ Plus&28EJ Plus Operation Manual © Nov. 2022...
Page 44 21. Platform control position 13. Jib rotate switch-not used 22. Ground control position 6. Enable switch 14. Platform rotate switch 7. Emergency power switch 15. Platform level switch 8. Not used 16. Not used © Nov. 2022 TB26EJ Plus&28EJ Plus Operation Manual...
Page 45 21. Heavy load indicator 9. Platform info 33. Overload limit 10. Alarm message 34. Drive limit (operating position) 22. Overload alarm 35. Drive and boom functions 11. Fault alarm 23. Not used allowed TB26EJ Plus&28EJ Plus Operation Manual © Nov. 2022...
Page 46 3. Turn the key switch at the ground controller to ON should be inoperative. position. 4. Ensure the relevant indicator light on the display Enable switch should be on and no error should be present. Horn button © Nov. 2022 TB26EJ Plus&28EJ Plus Operation Manual...
Page 47 Jib up/down switch-TB26EJ Plus&28EJ Plus 2. Move the enable switch and meanwhile move only leftwards the main boom telescope switch, the main boom should retract smoothly.
Page 48: Testing The Platform Controller
• Machine tilted • Length sensor faulted • Angle sensor faulted • Other faults TESTING THE PLATFORM CONTROLLER NOTICE All the tests of the platform controller should be completed within one cycle. © Nov. 2022 TB26EJ Plus&28EJ Plus Operation Manual...
Page 49 9. Not used 20. Drive direction 31. Buzzer button 10. Jib up/down switch-TB26EJ 21. Drive high/low speed select Plus&28EJ Plus only switch 11. Main boom telescope/jib rotation 22. Not used proportion control handle TB26EJ Plus&28EJ Plus Operation Manual © Nov. 2022...
Page 50 ON position, all functions should be Power indicator light inoperative. Drive function Light on indicates the platform controller is normally powered. Horn button © Nov. 2022 TB26EJ Plus&28EJ Plus Operation Manual...
Page 51 The machine must be driven at low speed when not on a level surface. Note: The turntable rotate speed is in direct proportion to the stroke of control handle. Main boom up/down TB26EJ Plus&28EJ Plus Operation Manual © Nov. 2022...
Page 52 CAUTION counterclockwise. control handle, the main boom should retract smoothly without shaking or abnormal noise. Jib up/down switch-TB26EJ Plus & TB28EJ Plus only Note: The main boom telescope speed is in direct proportion to the stroke of control handle. Jib rotate switch (not used) 1.
Page 53 Inverter switch (if equipped) Platform tilt indicator light Move the inverter switch, the inverter should be on/ off. CAUTION TB26EJ Plus&28EJ Plus Operation Manual 6-11 © Nov. 2022...
Page 54: Testing The Drive Speed
Heavy load indicator light pump, and meanwhile move the function switch to enable the boom lowering, retracting and rotating. © Nov. 2022 6-12 TB26EJ Plus&28EJ Plus Operation Manual...
Page 55: Testing The Tilt Protection System
5°in X (left-to-right)/Y (front-to- back) direction. 5. The tilt alarm should sound with the chassis tilt indicator light flashing, some functions are restricted, but the boom retracting, turntable TB26EJ Plus&28EJ Plus Operation Manual 6-13 © Nov. 2022...
Page 57 Before conducting any override operation, please make sure the surrounding area and the whole machine are in a safe state, try to avoid operation in a dangerous direction and ensure personal safety. TB26EJ Plus&28EJ Plus Operation Manual 6-15 © Nov. 2022...
Page 58 PRE-OPERATION FUNCTION TEST This Page Intentionally Left Blank © Nov. 2022 6-16 TB26EJ Plus&28EJ Plus Operation Manual...
Page 59: Operating The Machine
• Check the work site. tipping. • Check the safety decals/ nameplate on the machine. • Only use the machine according to the instructions in this manual and for its intended purpose. TB26EJ Plus&28EJ Plus Operation Manual © Nov. 2022...
Page 60 Boom fully extended; Boom kept horizontal; Turntable rotated 90°; The machine will tip over in the direction as indicated by the arrow if overloaded or operated beyond the limits of the maximum operating slope. © Nov. 2022 TB26EJ Plus&28EJ Plus Operation Manual...
Page 61: Emergency Stop
• Push the power disconnect switch on the left side of chassis to OFF, the system power will be disconnected and all functions will get inoperative. TB26EJ Plus&28EJ Plus Operation Manual © Nov. 2022...
Page 62: Emergency Lowering
When the platform or boom is caught overhead: If the platform or boom becomes jammed or snagged in overhead structures or equipment, rescue all people in the platform before freeing the machine. © Nov. 2022 TB26EJ Plus&28EJ Plus Operation Manual...
Page 63: Operation From Ground
4. Move the enable switch and meanwhile move upwards/downwards the platform level switch to level up or down the platform. TB26EJ Plus&28EJ Plus Operation Manual © Nov. 2022...
Page 64: Operation From Platform
6. Move the enable switch and meanwhile move backward/forward the main boom telescope/jib upwards/downwards the jib up/down switch to raise rotate control handle to extend or retract the main or lower the jib boom (TB26EJ Plus&28EJ Plus boom. only). 3. Depress the footswitch and meanwhile move...
Page 65: Driving On A Slope
The machine must not drive for over 2min on the 1. Determine the gradeability (climbing ability) of the maximum permissible slope grade to prevent the machine. tires running suspended. Maximum gradeability： Uphill: 45%/24° TB26EJ Plus&28EJ Plus Operation Manual © Nov. 2022...
Page 66: Charging The Battery
• The charging temperature range is -10℃~45℃. If a charge heating system is available, the temperature range is -20℃~45℃. Charging lead acid batteries (requiring maintenance) © Nov. 2022 TB26EJ Plus&28EJ Plus Operation Manual...
Page 67 Fast charging mode Add deionized water. Only for machines with a fast charger. Put back the bucket cover and connect the Method of connecting charger to input AC power water refilling plug. supply TB26EJ Plus&28EJ Plus Operation Manual © Nov. 2022...
Page 68 When the input voltage of power supply is 380V and the diameter of the charging cable is ≥2.5mm², the charging power can be 6KW. The wiring method is as shown in the figure. © Nov. 2022 7-10 TB26EJ Plus&28EJ Plus Operation Manual...
Page 69 OPERATING THE MACHINE Figure 7-9 3. For input of 380V AC power source, the machine will enter high-power charging mode automatically. TB26EJ Plus&28EJ Plus Operation Manual 7-11 © Nov. 2022...
Page 70 OPERATING THE MACHINE This Page Intentionally Left Blank © Nov. 2022 7-12 TB26EJ Plus&28EJ Plus Operation Manual...
Page 71: Transporting And Lifting The Machine
When using a forklift or crane to lift the machine, prevent the machine from colliding with nearby objects. • Lock the wheels of the machine after it has been loaded to prevent the machine from rolling. TB26EJ Plus&28EJ Plus Operation Manual © Nov. 2022...
Page 72: Lifting The Machine With A Crane
TB26EJ Plus TB28EJ Plus 286 mm 286 mm (11.3 in) (11.3 in) 1359 mm 1359 mm (53.5 in) (53.5 in) 6. Lift the machine as shown in the figure below. Figure 8-2 © Nov. 2022 TB26EJ Plus&28EJ Plus Operation Manual...
Page 73: Transporting The Machine
It is recommended to add a foam layer beneath the platform and ensure the platform is suspended in Follow these requirements when transporting the the air. machine by truck or trailer: TB26EJ Plus&28EJ Plus Operation Manual © Nov. 2022...
Page 75: Maintenance
& counterbalance valve on the cylinder. inspection report and must complete the repair & inspection report. • Immediately remove a damaged or malfunctioning machine from service, mark and stop using it. TB26EJ Plus&28EJ Plus Operation Manual © Nov. 2022...
Page 76: Conducting A Pre-Delivery Inspection
Every half a year or every 500 involved. Use the table to help you adhere to a routine A+B+C hours maintenance schedule. Every year or every 1000 hours A+B+C+D © Nov. 2022 TB26EJ Plus&28EJ Plus Operation Manual...
Page 77: Completing A Repair & Inspection
Machine Has Items in Good Damage or Description Been Repaired Condition Malfunction B-1 Inspect and Replace Hydraulic Oil Tank Return Filter Element B-2 Inspect Rim, Tire and Fasteners B-3 Inspect Hydraulic Oil TB26EJ Plus&28EJ Plus Operation Manual © Nov. 2022...
Page 78 Problem Machine Has Items in Good Damage or Description Been Repaired Condition Malfunction C-1 Inspect Boom Extending/ Retracting Wire Ropes and Pulleys C-2 Replace Hydraulic Tank Air Filter C-3 Inspect Weighing System © Nov. 2022 TB26EJ Plus&28EJ Plus Operation Manual...
Page 79: Major Modification And Repair Record
“Good” condition before company. continuing to use the machine. Table 9-4 Major Modification and Repair Record Model Serial No. Machine Repair- Repairman’s Status Problem Description Modification/Repair Item Date Company and Signature Position ter Change TB26EJ Plus&28EJ Plus Operation Manual © Nov. 2022...
Page 81: Decals/Nameplates Inspection
Do not operate the engine if there are missing or badly worn safety labels. TB26EJ Plus&28EJ Plus Operation Manual 10-1 © Nov. 2022...
Page 82: Decals/Nameplates (Gb)
DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATES (GB) (19) (11) (42) (11) (18) 30 31 16 15 (40) (42) © Nov. 2022 10-2 TB26EJ Plus&28EJ Plus Operation Manual...
Page 83 Decal-Crush hazard Decal-Rated load of 454kg 105046103004 Decal-Chart of working envelope 114004103002 TB26EJ Plus Decal-Chart of working envelope 114007103000 TB28EJ Plus Decal-Emergency stop switch 104011100016 Decal-Power switching 114002103014 101012100010 Decal-Electrocution hazard TB26EJ Plus&28EJ Plus Operation Manual 10-3 © Nov. 2022...
Page 84 Decal-Hydraulic oil 104009100018 Nameplate-GB 105001100057 215050000001 Blind rivet Decal-Direction marking 105001100051 Decal-No smoking or fire 101012100001 Decal-Direction marking 105001100053 Yellow & black hazard warning stripe tape 216060000002 Decal-Annual inspection date 101040103015 © Nov. 2022 10-4 TB26EJ Plus&28EJ Plus Operation Manual...
Page 85: Decals/Nameplate
DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATE-(GB, LITHIUM BATTERY) (19) (11) (42) (11) (18) 30 31 16 15 (40) (42) TB26EJ Plus&28EJ Plus Operation Manual 10-5 © Nov. 2022...
Page 86 DECALS/NAMEPLATES INSPECTION Description Qty. Part No. Remarks Decals (GB, lithium battery)-TB26EJ Plus 114004103015 Decals (GB, lithium battery)-TB28EJ Plus 114007103011 101016100034 Decal-Noise of 72dB Decal-Lifting points 104011100002 LOGO-Symbol (large sticker) 105045103002 104011100006 Decal-Bulkhead overhaul 104011100013 Decal-Electrocution hazard Decal-Tipping hazard 104011100007 Decal-General safety instructions...
Page 87 Decal-Hydraulic oil 104009100018 Nameplate-GB 105001100057 215050000001 Blind rivet Decal-Direction marking 105001100051 Decal-No smoking or fire 101012100001 Decal-Direction marking 105001100053 Yellow & black hazard warning stripe tape 216060000002 Decal-Annual inspection date 101040103015 TB26EJ Plus&28EJ Plus Operation Manual 10-7 © Nov. 2022...
Page 88: Decals/Nameplates (Ce-Metric)
DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATES (CE-METRIC) (41) (29) (16) (37) (29) © Nov. 2022 10-8 TB26EJ Plus&28EJ Plus Operation Manual...
Page 89 Decal-Crush hazard 101012100010 Decal-Electrocution hazard Decal-Charging voltage 101012100014 Decal-Rated load of 454kg 105046103004 Yellow & black hazard warning stripe tape 216060000002 Decal-Hydraulic oil level 104011100003 Decal-Hydraulic oil level 104011100010 Decal-Temperature range 104010100021 TB26EJ Plus&28EJ Plus Operation Manual 10-9 © Nov. 2022...
Page 90 Decal-No smoking or fire 101012100001 Decal-Direction marking 105001100053 Decal-Chart of working envelope 104004103002 TB26EJ Plus Decal-Chart of working envelope 114007103000 TB28EJ Plus Decal-Do not flushing with water 114004103013 Decal-Annual inspection date 101040103015 © Nov. 2022 10-10 TB26EJ Plus&28EJ Plus Operation Manual...
Page 91: Decals/Nameplates (Ce-Imperial)10-11
DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATES (CE-IMPERIAL) (41) (29) (16) (37) (29) TB26EJ Plus&28EJ Plus Operation Manual 10-11 © Nov. 2022...
Page 92 Decal-Crush hazard 101012100010 Decal-Electrocution hazard Decal-Charging voltage 101012100014 Decal-Rated load of 454kg 105046103004 Yellow & black hazard warning stripe tape 216060000002 Decal-Hydraulic oil level 104011100003 Decal-Hydraulic oil level 104011100010 Decal-Temperature range 104010100021 © Nov. 2022 10-12 TB26EJ Plus&28EJ Plus Operation Manual...
Page 93 Decal-No smoking or fire 101012100001 Decal-Direction marking 105001100053 Decal-Chart of working envelope 104004103002 TB26EJ Plus Decal-Chart of working envelope 114007103000 TB28EJ Plus Decal-Do not flushing with water 114004103013 Decal-Annual inspection date 101040103015 TB26EJ Plus&28EJ Plus Operation Manual 10-13 © Nov. 2022...
Page 94: Decals/Nameplates (Ansi)
DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATES (ANSI) (43) (29) (16) (37) (29) © Nov. 2022 10-14 TB26EJ Plus&28EJ Plus Operation Manual...
Page 95 Decal-Crush hazard 101012100010 Decal-Electrocution hazard Decal-Charging voltage 101012100014 Decal-Rated load of 454kg 105046103004 Yellow & black hazard warning stripe tape 216060000002 Decal-Hydraulic oil level 104011100003 Decal-Hydraulic oil level 104011100010 Decal-Temperature range 104010100021 TB26EJ Plus&28EJ Plus Operation Manual 10-15 © Nov. 2022...
Page 96 Decal-Chart of working envelope 104004103002 TB26EJ Plus Decal-Chart of working envelope 114007103000 TB28EJ Plus Decal-Annual inspection date 101040103015 Decal-Operation instructions 105029103023 Decal-Do not flushing with water 114004103013 103010103014 Decal-Non-insulated Decal-Annual inspection date 101040103015 © Nov. 2022 10-16 TB26EJ Plus&28EJ Plus Operation Manual...
Page 97: Decals/Nameplates (Csa)
DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATES (CSA) (43) (29) (16) (37) (29) TB26EJ Plus&28EJ Plus Operation Manual 10-17 © Nov. 2022...
Page 98 Decal-Crush hazard 101012100010 Decal-Electrocution hazard Decal-Charging voltage 101012100014 Decal-Rated load of 454kg 105046103004 Yellow & black hazard warning stripe tape 216060000002 Decal-Hydraulic oil level 104011100003 Decal-Hydraulic oil level 104011100010 Decal-Temperature range 104010100021 © Nov. 2022 10-18 TB26EJ Plus&28EJ Plus Operation Manual...
Page 99 Decal-Chart of working envelope 104004103002 TB26EJ Plus Decal-Chart of working envelope 114007103000 TB28EJ Plus Decal-Annual inspection date 101040103015 Decal-Operation instructions 105029103023 Decal-Do not flushing with water 114004103013 103010103014 Decal-Non-insulated Decal-Annual inspection date 101040103015 TB26EJ Plus&28EJ Plus Operation Manual 10-19 © Nov. 2022...
Page 100 DECALS/NAMEPLATES INSPECTION This Page Intentionally Left Blank © Nov. 2022 10-20 TB26EJ Plus&28EJ Plus Operation Manual...
Page 101: Appendix 1: Symbols And Description
Never use machine in Never use machine in Never push or pull Never suspend objects Never place ladders strong, gusty wind strong, gusty wind objects outside from platform and scaffolding on the platform platform TB26EJ Plus&28EJ Plus Operation Manual © Nov. 2022...
Page 102 Fast/high speed Slow/low speed personnel can perform the maintenance Horn Lifting point Lashing points Tire to ground load Hydraulic oil filler Platform carrying Do not use damaged Tool or weight capacity cords © Nov. 2022 TB26EJ Plus&28EJ Plus Operation Manual...
Page 103: Appendix 2: Prepare The Work Record Before Delivery
3. Record the inspection results. If any inspection result is “NO”, the machine must be stopped, and then re- inspected after repair is completed, and the box marked “REPAIRED” shall be checked. TB26EJ Plus&28EJ Plus Operation Manual © Nov. 2022...
Page 104 DECALS/NAMEPLATES INSPECTION This Page Intentionally Left Blank © Nov. 2022 TB26EJ Plus&28EJ Plus Operation Manual...
Page 105: Appendix 3: Repair & Inspection Report
B-1 Inspect and Replace Hydraulic Oil Tank Return Filter Element B-2 Inspect Rim, Tire and Fasteners B-3 Inspect Hydraulic Oil B-4 Inspect Electrical Wiring B-5 Inspect Emergency Lowering B-6 Inspect Air Filter of Hydraulic Tank TB26EJ Plus&28EJ Plus Operation Manual © Nov. 2022...
Page 106 Air Filter C-3 Inspect Weighing System Checklist D Procedures REPAIRED/ YES/Machine is NO/Machine Has Problem Machine Has Items in Good Damage or Description Been Repaired Condition Malfunction D-1 Replace Drive Reducer Gear Oil © Nov. 2022 TB26EJ Plus&28EJ Plus Operation Manual...
Page 107 4. Record the inspection results. If any inspection item is marked as "NO", the machine must be stopped and re- inspected after repair is completed and the box marked "REPAIRED" shall be checked. Select the appropriate inspection procedure based on the inspection type. TB26EJ Plus&28EJ Plus Operation Manual © Nov. 2022...
Page 108 DECALS/NAMEPLATES INSPECTION This Page Intentionally Left Blank © Nov. 2022 TB26EJ Plus&28EJ Plus Operation Manual...
Page 109: Appendix 4: Major Modification And Repair Record
Modification/Repair” in the form will be “Good” and the machine can be used. If either inspection result is “NO”, the machine must be re-inspected after the repair is completed until the machine is in “Good” condition before continuing to use the machine. TB26EJ Plus&28EJ Plus Operation Manual © Nov. 2022...
Page 110 Solution s Alw ays For B et t er A ccess Solution s Always for Better Access Solutions AS/N ZS Hunan Sinoboom Intelligent Equipment Co., Ltd. 长沙市宁乡高新技术产业园区金洲大道东 128 号 No.128, East Jinzhou Avenue, Ningxiang High-tech Industrial Park, Changsha, Hunan, China 市宁乡高新技术产业园区金洲大道东...

This manual is also suitable for:

Tb860ej plus Tb28ej plus Tb910ej plus

Sinoboom TB26EJ Plus Operation Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Sinoboom TB26EJ Plus

Summary of Contents for Sinoboom TB26EJ Plus

This manual is also suitable for:

Table of Contents