Advertisement
The hose ring is a feature designed
ai
to prevent tipping of the vacuum while
performing certain tasks that involve
mng Mount.
¿Eo non
the use of attachments. To use this
anti-tip feature, place the hose ring in the
hose ring mount as shown in the illustration.
Rotate this ring on the hose so that the
hose ring knob will align with the slot in the
hose ring mount and slide the ring down
firmly until it stops. For recommendations
on when to use the hose ring and the exact
location of the hose ring mount see the Use of
Attachments section.
Do not use outlets above counters.
Damage to items in the surrounding areas
could occur. Be sure the switch is in the off position while plugging the cord in.
-POWE = ER CORD
a,
ibe tnt at tate RER... BE re
A neste Pr
ms BR
NOTE:
To reduce the risk of electrical shock, this vacuum has a polarized plug, (one blade is wider
than the other). This plug wil fit in a polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it stil does not fit, contact a qualified electrician to install the proper outlet.
DO NOT CHANGE THE PLUG IN ANY WAY.
ORS EBS,
aoe
2. „ONOFF SWITCH u
1. Plug the power cord into a 120V outlet.
2. To start the vacuum cleaner, push the
switch to the ON position.
3. To stop the vacuum cleaner, pull the
switch to the OFF position.
Advertisement
