Advertisement
TO ASSEMBLE CLEANER
YIN WARNING cc: rock nazara
Do not plug into electrical supply until assembly is complete. Failure to do so could
result in electrical shock or injury.
ATTACHING | HANDLE JO VACUUM CLEANER,
a
A
A
A
The vacuum cleaner main body and handle are packed separately.
. The handle
2. Insert the screw
screw has been
that you removed.
installed for
Be sure the screw
shipping
is tightened, but
purposes.
not overtightened.
Please
remove the
screw before
inserting
handle.
Insert
the handle as
shown in the
illustration. Make sure the On/Off switch
is in the Off position before installing.
. There is a recessed area between
. Loosely wrap the cord around
the upper cord storage hook base
both cord hooks. Secure the
and the handle that is designed to
plug head to the cord by
secure the cord during vacuuming.
pushing the cord into the
retainers on the plug head.
Always push the power cord down
into this recessed area to help keep
the cord from hanging near the
nozzle and being damaged.
. The upper cord hook has a
2. Do not unplug the power cord by
quick-release action. To
>
pulling on the cord. Grasp the
release the cord, rotate the
AAN
plug head and pull to unplug
hook downward and the
JENNA
the vacuum cleaner.
complete power cord will
be be
drop off the hook for
Retum the hook to the upright
immediate use.
|
position before attempting to
yy
rewind the cord.
Advertisement
