Advertisement
ES
a
: SE
y
i
g
i
l "CL
Se
ee
PP
REMOVING CLOGS:
'
The hose located on the back of the vacuum cleaner carries the dirt from the nozzle
up to the dust bag. If the hose should become clogged:
1. Pull down on the suction inlet cover
3. If the dog still exists, tum the vacuum cleaner
and check for clogging in this area.
"OFF" and unplug the power cord. Tum the
vacuum cleaner over, exposing the underside.
2. Disconnect
the hose from the nozzie
Remove
the iower plate. Remove
the short
and check the hose for clogging.
nozzle pipe from the nozzle by lifting it
Plug in the vacuum cleaner
and tum it on.
straight up. Inspect the hose end and nozzle
While running the vacuum cleaner with
pipe and clear them of
j
the hose disconnected,
stretch the hose
any obstructions.
in and out to remove the clog.
Reinstall the nozzle pipe, lower plate and
nozzle hose. See the Removing/installing the
Lower Plate section for detailed instructions.
xis
eisini ja a
oe
3
S
- 18 -
Advertisement
