Advertisement
Always operate the vacuum with a genuine Panasonic Type U3 (Standard) or U6
(Electrostatic) dust bag installed. Panasonic dust bags may be ordered through
any authorized Panasonic dealer.
1. Pull outward on the
dust cover grip,
located on the top
front of the dust
cover and remove
the cover.
3. Spread out the end of the
new dust bag.
NOTE:
Pull carefully so
as not to tear the bag at
the folds.
. Reinsert the tabs
provided on the end
of the dust cover into
the grooves on the
dust compartment
to allow the cover
to rotate closed.
NOTE:
The dust
cover must be
completely
and correctly
2. To remove the dust
bag, grasp the
cardboard portion
of the dust bag
and pull it out.
. Attach the new dust
bag onto the bag
hoider by holding
the cardboard
portion and
pushing back as
illustrated.
. Rotate the dust cover up
into the closed position
and press into place.
NOTE:
The dust bag
should not be caught
between the
lower edge
of the dust
cover and
the gasket as
indicated by
the arrow in
the illustration.
-13-
Advertisement
