Advertisement
BEFORE REQUESTING SERVICE
A
WAR NIN G
Electrical Shock or Personal Injury Hazard.
Disconnect the electrical supply before servicing or cleaning the unit. Failure to do
so could result in electrical shock or personal injury from cleaner suddenly starting.
Review this chart to find do-it-yourself solutions for minor performance
problems.
Any service needed, other than those described in these
Operating Instructions, should be performed by an authorized service
representative.
PROBLEM
POSSIBLE CAUSE
POSSIBLE SOLUTION
Cleaner
1. Unplugged at wail outlet.
. Plug in firmly. Push On/Off switch
will not run.
to On.
. On/Off switch not turned on.
. Push On/Off switch to On.
. Tripped circuit breaker/olown
. Reset circuit breaker or replace
fuse at household service panel.
fuse.
Poor job of dirt
. Full or clogged dust bag.
. Change bag.
pickup.
i
. Broken belt.
. Replace belt.
. Clogged nozzle.
. Clean nozzle area.
. Hose not inserted fully.
. Insert hose.
. Worn agitator assembly.
. Replace agitator assembly.
. Hole in hose.
. Replace hose.
. Dust cover improperly installed.
. Properly install dust cover.
Light will
. Burned out light bulb.
. Replace light bulb.
not work.
Dust escapes
. Bag improperly instalied.
. Properly install bag.
the paper bag.
. Bag torn.
. Replace bag.
Dirt Sensor will
. Dirty optic cells.
. Clean optic cells.
not work.
Advertisement
