Advertisement
EL
Button Functions
n
u
Select Button (SELECT)
The upper line ot the display alternates between the current speed and the cadence modes when the select button
is pressed.
Mode Button
The display mode mark shifts in the illustrated sequence each since the button is pressed, and the corresponding
data is simultaneously displayed on the lower line of the display.
(Note) When cadence is displayed, the maximum speed (MXS) is no longer displayed. But the maximum speed
(MXS) data is stored to memory.
StarVStop Button
Measurement of the trip distance and elapsed time is simultaneously started or stopped when the start/stop button
is pressed. During operation the cadence or the speed scale symbol flashes.
• RESET:
Select any other mode except total distance (ODO), and press the mode button and start/stop button simultaneously.
{Maximum speed (MXS), trip distance (DST), average speed (AVS) and elapsed time (TM) should be zero.)
• ALL CLEAR:
t
1(
When the mode button, start/stop button, and select button are pressed simultaneously, ail data stored in memory
(including ODO and wheel circumference data) are cleared, alt displays illuminate for 2 seconds, then the mile/h
symbol illuminates.
This operation should only be executed after replacing the battery or when irregular display of information occurs.
-8-
Advertisement
