Table of Contents
Advertisement
P5TX–AR User's Manual
3: Reconfiguring Your Mainboard – 3.4
CMOS Setup Utility –
PnP/PCI Configuration
When 'Resources Controlled
By' is set to 'Manual' you can
individually configure the IRQ
& DMA channel settings. The
individual defaults are for PnP
cards and will still use all the
items listed to automatically
assign resources as needed.
If you are installing a 'legacy'
ISA card that requires manual
configuration, you can manu-
ally assign the required re-
sources as needed. See the
next page for an example.
Advertisement
Table of Contents
Need help?
Do you have a question about the P5TX-AR and is the answer not in the manual?
Questions and answers