Features - PCchips M902LU V3.0 Manual

Hide thumbs Also See for M902LU V3.0:
Table of Contents

Advertisement

F
e
a
t
u
r
e
s
F
e
a
t
u
r
e
s
Supports mPGA Socket 478
Processor
Supports Intel Pentium 4 series CPUs
Supports up to 400/533 MHz system Bus
Two 168-pin DIMM slots for SDRAM memory modules
Memory
Two 184-pin DIMM slots for DDR SDRAM memory mod-
ules
Support SDRAM up to 133 MHz/DDR up to 266 MHz
memory bus
Maximum installed memory is 2GB
Note: You cannot use SDRAM and DDR concurrently.
Four 32-bit PCI Master slots (PCI 2~5) and one Slave slot
Expansion Slots
(PCI 1)
Supports IDE Ultra DMA bus mastering with transfer rates
of 33/66/100 MB/sec
One 4xAGP slot - supports 1.5V 4x AGP card only
One CNR (Communications and Networking Riser) slot
AC'97 Audio
The AC 97 Audio codec is compliant with the AC 97 2.2 speci -
Codec
fication, and supports 18-bit ADC (Analog Digital Converter)
and DAC (Digital Analog Converter) resolution as well as 18-bit
stereo full-duplex codec with independent and variable sam-
pling rates. Further features include support for four analog
line-level stereo inputs.
Built-in 10BaseT/100BaseTX Ethernet LAN
Built-in Ethernet
Integrated Fast Ethernet MAC and full compliance with
LAN (optional)
IEEE 802.3u 100 Base-T specifications and IEEE 802.3x
Full Duplex Flow Control
In compliance with ACPI 1.0 and the Network Device
Class Power Management 1.0
High Performance achieved by 100Mbps clock generator
and data recovery circuit for 100Mbps receiver
Two PS/2 ports for mouse and keyboard
Onboard I/O
Two serial ports
Ports
One parallel port
One MIDI/game port
Six USB ports (two back-panel USB 2.0 ports, onboard
USB headers providing maximum four extra ports: header
JUSB2 for USB 2.0 and header USB2 for USB 1.1)
Audio jacks for microphone, line-in and line-out
Compliant with Universal Serial Bus Specification Revi-
USB 2.0
sion 2.0
(optional
Compliant with Intel's Enhanced Host Controller
VT6202)
Interface Specification Revision 0.95
Compliant with Universal Host Controller Interface
Specification Revision 1.1
PCI multi-function device consists of two UHCI Host
Controller cores for full-/low -speed signaling and one
EHCI Host Controller core for high-speed signaling
Root hub consists 4 downstream facing ports with
integrated physical layer transceivers shared by UHCI
and EHCI Host Controller
Support PCI-Bus Power Management Interface
Specification release 1.1
2

Advertisement

Table of Contents
loading

Table of Contents