ICON Health & Fitness NordicTrack FUSION CST User Manual page 9

5. Identify the Front and Rear Bottom Covers
(67, 109) and press them into place as shown.
6. Plug the Power Adapter (126) into the receptacle
on the rear of the strength system.
Note: To plug the Power Adapter (126) into an
outlet, see HOW TO PLUG IN THE POWER
ADAPTER on page 11.
7. Go to my.nordictrack.com on your computer
and register your product.
• documents your ownership
• activates your warranty
• ensures priority customer support if assistance
is ever needed
Note: If you do not have internet access, call
Customer Care (see the front cover of this
manual) and register your product.
8. Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in
HOW TO USE THE STRENGTH SYSTEM, beginning on page 11.
Before using the strength system, pull each handle a few times to make sure that the ropes move smoothly
around the pulleys. If one of the ropes does not move smoothly, find and correct the problem.
5
67
6
7
9
109
126