Standard Compliance; Warranty - Danfoss 088L0028 User Manual

Continuity tester
6

Standard compliance

• ISO 1502:1996 ISO general-purpose metric screw
threads – Gauges and gauging.
• ISO 13444:2012 Technical product documentation
(TPD) – Dimensioning and indication of knurling.
7

Warranty

A 2-year product warranty is valid for:
• Continuity tester
Should you, against all expectations, experience a prob-
lem with your Danfoss product, you will nd that Danfoss
o ers Danfoss warranty valid from the date of purchase
on the following conditions: During the warranty period
Danfoss shall o er a new comparable product or repair
the product if the product is found to be faulty by reason
of defective design, materials or
workmanship. The repair or replacement.
The decision to either repair or replace will be solely at
the discretion of Danfoss. Danfoss shall not be liable
for any consequential or incidental damages including,
but not limited to, damages to property or extra utility
expenses. No extension of the warranty period following
repairs undertaken is granted.
The warranty shall be valid only if the WARRANTY
CERTIFICATE is completed correctly and in accordance
User Guide 9