Danfoss 088L0028 User Manual page 10

Continuity tester
with the instructions, the fault is submitted to the installer
or the seller without undue delay and proof of purchase
is provided. Please note that the WARRANTY CERTIFICATE
must be lled in, stamped and signed by the authorized
installer perform ing the installation (Installation date
must be indicated). After the installation is performed,
store and keep the WARRANTY CERTIFICATE and purchase
documents (invoice, receipt or similar) during the whole
warranty period.
Danfoss warranty shall not cover any damage caused by
incorrect conditions of use, incorrect installation or if in-
stallation has been carried out by non-authorized electri-
cians. All work will be invoiced in full if Danfoss is required
to inspect or repair faults that have arisen as a result of
any of the above. The Danfoss warranty shall not extend
to products which have not been paid in full. Danfoss will,
at all times, provide a rapid and e ective response to all
complaints and inquiries from our customers.
The warranty explicitly excludes all claims
exceeding the above conditions.
For full warranty text please use QR code
10 User Guide