Table of Contents
Advertisement
2. Getting Started
• Do not lift the ADF forcefully. Otherwise, the cover of the ADF might open or be damaged.
1.
Lift the ADF or the exposure glass cover.
Be sure to lift the ADF by more than 30 degrees. Otherwise, the size of the original might not be
detected correctly.
2.
Place the original face down on the exposure glass. The original should be aligned to the
rear left corner.
Start with the first page to be scanned.
1
1
1. Positioning mark
3.
Lower the ADF or the exposure glass cover.
Placing Originals on the Exposure Glass
• Keep your hands away from the hinges and exposure glass when lowering the ADF. Not doing
so may result in an injury if your hands or fingers are pinched.
• Do not lift the ADF forcefully. Otherwise, the cover of the ADF might open or be damaged.
1.
Lift the ADF.
Be sure to lift the ADF by more than 30 degrees. Otherwise, the size of the original might not be
detected correctly.
2.
Place the original face down on the exposure glass. The original should be aligned to the
rear left corner.
Start with the first page to be scanned.
84
DCG030
(mainly North America)
Advertisement
Table of Contents
