Ricoh MP 3554G User Manual page 195

Problem
Misfeeds occur frequently.
Misfeeds occur frequently.
Cause
Using curled paper often
causes misfeeds, soiled
paper edges, or slipped
positions while staple or
stack printing is performed.
The tray's side or end fences
may not be set properly.
When You Have Problems Operating the Machine
Solution
• Flatten the paper with your hands
to straighten out the curl.
• Load the paper up side down so
that the curled edges face
downward. For details about
recommended paper, see
"Recommended Paper", Paper
Specifications and Adding Paper.
• Place cut paper on a flat surface
to prevent paper from curling,
and do not lean it against the
wall. For details about the proper
way to store paper, see "Paper
Storage", Paper Specifications
and Adding Paper.
• Remove the misfed paper. For
details about removing jammed
paper, see "Removing Jammed
Paper", Troubleshooting.
• Check that the side or end fences
are set properly. Also, check that
the side fences are locked. For
details about setting the side and
end fences, see "Changing the
Paper Size", Paper Specifications
and Adding Paper.
193