Bios Features Setup; Details Of Bios Features Setup - Asus P2B Pentium II User Manual

Pentium ii motherboard

Hide thumbs Also See for P2B Pentium II:

Table of Contents

IV. BIOS SOFTWARE

BIOS Features Setup

This "BIOS Features Setup" option consists of configuration entries that allow you

to improve your system performance, or let you set up some system features accord-

ing to your preference. Some entries are required by the motherboard's design to

remain in their default settings.

A section at the lower right of the screen displays the control keys you can use. Take

note of these keys and their respective uses. If you need information on a particular

entry, highlight it and then press <F1>. A pop-up help menu will appear to provide

you with the information you need. <F5> loads the last set values, <F6> and <F7>

loads the BIOS default values and Setup default values, respectively.

NOTE: SETUP Defaults are noted in parenthesis next to each function heading.

CPU Internal Core Speed (350MHz)

This function is reserved for future use and is currently disabled.

Virus Warning (Disabled)

This field protects the boot sector and partition table of your hard disk against acciden-

tal modifications. Any attempt to write to them will cause the system to halt and dis-

play a warning message. If this occurs, you can either allow the operation to continue

or use a bootable virus-free floppy disk to restart and investigate your system. This

setting is recommended because of conflicts with new operating systems. Installation

of new operating systems require that you disable this to prevent write errors.

ASUS P2B User's Manual

Table of Contents