Federal Signal Corporation DFC-WC-FRD21 Manual page 3

To install the DFC-WC-FRD21 Push Bumper Wire Cover:
1. Place the wire covers (Items 1 and 2) as shown in Figure 2. Note that the figure is of the driver-side wire
cover (Item 1).
2. Install the supplied hardware as shown in Figure 3.
3. Tighten all hardware to 8 ft-lb.
DFC-WC-FRD21 Push Bumper Wire Cover
Federal Signal www.fedsig.com
Installing the DFC-WC-FRD1 Push Bumper Wire Cover on the 2021+ Ford
Figure 2 Wire cover placement (Driver side shown)
Figure 3 Install hardware
1
6
5
4
1
3
F-150
® ®
3