Table of Contents
Advertisement
¯ ® ¬: Move
F5 : Previous Value
3.6.1 ACPI Function
This item allows you to enable or disable the function of Advanced Configuration and Power
Interface which offers improved power management .
3.6.2 Power Management
Min Saving
Max Saving
User Define
Power Management
HDD Power Downt
Doze Mode
Suspend Mode
¯ ® ¬: Move
F5 : Previous Value
3.6.3 HDD Power Down
This instructs hard drives to shut off while in the Power Management modes.
3.6.4 Doze Mode
When system is inactive after the predefined time limit, system performance will drop down.
This is the first level of Power Management.
3.6.5 Suspend Mode
System further shuts down all devices except for CPU itself. This is the third level of Power
Management.
3.6.6 ACPI Suspend Type
This field is used to select the type of Suspend function.
S1 (POS): Enables the Power On Suspend function.
S3 (STR): Enables the Suspend to RAM function. Refer to Appendix A.
3.6.7 PM Control by APM
Select "Yes" if your system has Advanced Power Management (APM).
3.6.8 Video Off Option
When enabled, this feature allows the VGA adapter to operate in a power saving mode.
Always On
Suspend --> Off
Enter : Select
+/-/PU/PD : Value F10 : Save ESC : Exit F1 : General Help
F6 : Fail-Safe Defaults
System starts power saving function when the
inactivity period exceeds 1 hour.
System starts power saving function when the
inactivity period exceeds 1 min.
Allows user to define the inactivity period before
power saving function activates,
CMOS Setup Utility - Copyright ( C ) 1984 - 2000 Award Software
Power Management
User Define
Disable
Disable
Disable
Enter : Select
+/-/PU/PD : Value F10 : Save ESC : Exit F1 : General Help
F6 : Fail-Safe Defaults
Monitor will remain on during power saving
modes.
Monitor blanked when the systems enters the
Suspend mode.
F7 : Optimized Defaults
Item Help
Menu Level >
F7 : Optimized Defaults
Advertisement
Table of Contents
