Chapter 4: The Tape Player; Playing A Tape - Sony LBT-D170 Operating Instructions Manual

Chapter 4:
the Tape
Player
Playing a Tape
Recording a CD
Recording a CD: Selecting
tape Length (tape select
edit)
Recording a CD: Specifying
Tape Length (time edit)
Recording From the Radio
Recording From Another
Tape (dubbing)
Lt Se se F]
Playing a Tape
SYSTEM
POWER > ON DOLBY NR
aD fp aS
fe} Pi ve S ae =
ETT ECY (re on
DD on Sa i
<< i ae
2 =e igis og
1 ca! = 1
mks SH pp
a <<
1 Press O/£ to open the tape
compartment.
Insert a recorded tape in deck A or B
with the tape side facing down and the
side you want to play facing forward.
Push to close the compartment.
2 Press D>.
The tape starts plaving.
To Press
Stop play 0/8
Pause- 00
Resume play after pause D0
Fast forward b>
Rewind <<
Remove the cassette 0/2
To play both decks in succession
(relay play)
The relay play sequence is B — A.
1 Press O/8 and insert recorded tapes in
both decks.
2 Press D> on deck B.
3 Press 08 and D> on deck A.
To stop relay play, press 0/& on the
plaving deck.
If you play both decks at the same time
You will hear the sound from deck B.
When listening to a tape recorded with the
Dolby* B-type noise reduction system
Press DOLBY NR button so that "DOLBY
NR B" appears in the display.
The setting affects both decks. Dolby noise
reduction system reduces tape hiss noise in
low-level high-frequency signals.
* Dolby noise reduction manufactured
under license from Dolby Laboratories
Licensing Corporation. "DOLBY" and the
double-D symbol DO are trademarks of
Dolby Laboratories Licensing Corporation.
One Touch Play feature
Press E> on deck A or B when the power is
off or when you are listening to another
sound source. You can listen to the tape
without pressing any other buttons when a
tape is in the player. If no tape is inserted,
the system will just turn on.
Notes
e When playing a tape on one deck, if you
rewind or fast-forward the tape in the
other deck, the playback sound is
temporarily uneven.
e Make sure the tape plaver stops when
you turn off the unit.
SS ae ee ed
Recording a CD
You can record from a CD to a tape. Use
TYPE I (normal or TYPE H (CrO?) tapes.
You cannot listen to other sources while
recording
SYSTEM
POWER > ON
> 32
1 Press FUNCTION repeatedly until
"CD" appears in the display.
2 Press & OPEN and place a CD on the
tray.
Make sure the playing position indicator
in the display is lit under the disc
number of the CD you want to record.
The total number of tracks and the total
plaving time appear in the display.
3 Press 0/8 and insert a blank tape into
deck B with the side you want to record
on facing forward.
Make sure the tabs on the cassette have
not been removed.
continue to next page >
Chapter 4: the Tape Player
13