Clarion ARX7370R Owner's Manual page 15

Radio Operations
3. Tune in to a station.
@ Quick tuning:
Press left or right and hold a-selector [2] for 1
second or longer.
@Step tuning:
Press left or right.
* "SRCH" appears in the display 7 seconds after
manual tuning, and seek tuning becomes avail-
able.
Recalling a preset station
Preset tuning is a function for storing stations to
Preset buttons (1 to 6) which enables you to se-
lect a station by pressing the corresponding pre-
set button.
1. Press BAND button [11] to select a band.
2. Press one of Preset buttons [12] to select a
stored station.
Note:
© Press and hold Preset button |12] for 2 seconds or
longer to store the station currently being received
(preset memory).
Manual memory
Up to 24 stations (6 each for the FM1, FM2, FM3
and AM stations) can be preset in the Preset
buttons.
1. Press BAND button [11] to select a band.
2. Select left or right to tune in to a desired sta-
tion using a-selector [2].
3. Press and hold one of Preset buttons [12] for 2
seconds or longer to store the station currently
being received.
Auto store
Auto store is a function for storing up to 6 sta-
tions that are automatically tuned in sequentially.
Notes:
¢ The only FM band that can store stations is FM3.
' If you try to store stations in FM1 or FM2, the sta-
tions will automatically be stored in FM3.
¢ When the auto store is performed, the station pre-
viously stored in the memory at that position is
overwritten.
If there are fewer than 6 stations with good recep-
tion, the stations previously stored at the remain-
ing Preset buttons are not overwritten.
e A station already stored in one of Preset buttons
cannot be stored in another Preset buttons.
1. Press BAND button [11] to select a band (FM3
or AM) of the desired station.
2. Press and hold AS button [7] for 2 seconds or
longer. The stations with good reception are
stored automatically to Preset buttons [12].
Preset scan
This function scans through each preset station
for 7 seconds sequentially.
This is useful when you want to search for a de-
sired station.
Note:
¢ Take note that if you press and hold PS button
for 2 seconds or longer, the auto store function
goes into effect and the unit starts storing stations.
1. Press PS button [7].
2. When a station that you want to listen to is
tuned in, press PS button [7] again or the cor-
responding Preset button [12] to stop preset
scan.
* A station that cannot be tuned in to is skipped
and the next preset station is tuned in.
ARX7370R/ARX7370RW 13