Preparation - Philips 42PW9982 User Manual

8
R
EXTERNAL
FRONT
SPEAKERS
L

Preparation

Make sure that the wall mount (see wall mounting instructions
supplied) is being fixed securely enough so that it can carry at least
50 kg.
Place the receiver box wherever you want, but leave at least 5 cm space free
all around the box for ventilation.
(E.g. on the ground, in a cupboard, behind a wall, in another room....)
Connect one of the supplied aerial cables
DISPLAY VIDEO
frontcover of this handbook.
Make sure all screws of the cables
Check if the red loudspeaker button at the back of the receiver is in the
INTERNAL SPEAKERS
Connect the two Surround Sound rear loudspeakers supplied
6
Always connect both Surround Sound loudspeakers: the left rear loudspeaker
R
at
REAR
SPEAKERS
Push the connector clip down and insert the end of the wire into the opening: the
positive wire (the one with the black line) to the grey loudspeaker connection; the
R
negative wire to the black loudspeaker connection. Do not insert the wires too far.
The Surround Sound loudspeakers should always be located behind or to either side of
the listener. If preferred you can also hang the loudspeakers on the wall.
L
To connect your computer, see p. 23.
To connect other peripherals, see p. 20.
In order to obtain the best result, please use only the supplied antenna cables
between the receiver box and videorecorder, and between videorecorder and
antenna connector.
Insert the mains plug supplied
receiver and in the wall socket with a mains voltage of 220V-240V.
Please, only use the supplied rim-earthed mains cord with its built-in
RO3 / AAA
suppressor to ensure safety and EMC.
Remote control: Remove the cover of the battery compartment.
Insert the 2 batteries supplied (Type R03G-1,5V).
Press the TV key next to the display to be sure your remote control is in the
TV mode.
The batteries supplied do not contain the heavy metals mercury and cadmium.
Nevertheless in many countries exhausted batteries may not be disposed of with your
household waste. Please ensure you dispose of exhausted batteries according to local
regulations.
Switch TV on : Press the power button
A green indicator and the screen light up.
If the indicator is red, press the + P - key on the remote control.
The green indicator blinks every time you press a key on the remote control.
When you switch on your set for the first time, the
appears on the screen. Alternatively the explanation appears in the different
languages.
, and
SUBWOOFER
position.
; the right rear loudspeaker at
REAR L
, and the
DISPLAY POWER
cables as shown in the inside
and are tighted well.
.
REAR R
into the power socket at the back of the
on the front of the receiver.
MENU LANGUAGE
,
.
automatically
3