Connect Your Computer - Philips 42PW9982 User Manual

Connect your computer

•
Connect one end of a VGA cable (not supplied) to the video card of the
computer and the other end to the
the receiver or at the VGA connector behind the door at the front of the
receiver. See also p. 16, VGA input.
•
Fix the connectors firmly with the screws on the plug.
•
In case of a Multimedia computer, connect audio cables (not supplied) to the
audio outputs of your Multimedia computer and to the
(left) inputs next to the
L
AUDIO AUDIO
L L
R R
VGA VGA
AUDIO AUDIO
IN OUT
Connect your Apple Macintosh* computer
Attention: Macintosh computers with separate H and V synchronisation signals
can be used together with the supplied adapter. Macintosh computers with
Composite Sync and Sync on Green signals may need a special (not
supplied) adapter or cable. Contact your dealer.
•
Connect the supplied switchable adapter for Apple video connectors to one
end of a VGA cable.
•
Put the DIP switches on the adapter in the following positions :
1 2 3
off off on
•
Connect the end of the VGA cable with the adapter to the video card of the
computer and the other end to the
front of the receiver.
•
Screw the connectors down firmly.
15-pin D sub
(2-row)
To reproduce computer screen information and/or programmes, see p. 25.
* Apple Macintosh is a registered trademark of Apple Computer, Inc.
connector at the rear side of
VGA IN
connector.
VGA IN
4
on
connector on the back or the
VGA IN
15-pin mini D sub
(3-row)
(right) and
AUDIO R
23