Table of Contents
Advertisement
TV
VCR 1
TUNER
VCR 2
TAPE
DVD
SAT
M
AMP
CD
TV
b
OK
P
1
2
3
4
5
6
7
8
9
0
æ
Sleeptimer
FEATURES
Child Lock
General PP store
Message
Timers
VGA Input
Message ...................
...........................
Change
MESSAGE
Clear
Type
Run
activate
select
adjustments
features menu
•
•
•
•
•
•
•
Features menu
Press the yellow key to display/cancel the
A
Use the
key to select a menu item.
Press the OK key to activate.
Sleeptimer
With the sleeptimer you can set a time period after which the TV should
switch itself off to standby.
The counter runs from Off up to 180 min. or from 180 min. down to Off.
One minute before the TV is set to go to standby, the remaining minute and
the message Good Night appear on screen. You can always switch off your
set earlier or change the set time.
Child Lock
If the child lock is on, the TV can only be switched on with the remote
control.
The keys P - and + behind the front door of the receiver cannot be used to
select a TV channel. In this way you can prevent unauthorised use of your TV.
If the message Child Lock On appears, the child lock must be switched off
before you can use the P - and + keys on the receiver to select a TV channel.
General PP store
The adjustments of Contrast, Brightness, Colour and Dynamic Contrast made
in the picture menu and the adjustments of Volume, Balance (of the internal
speakers) and Graphic Equalizer made in the sound menu and Volume and
Balance in the headphone menu can be stored in memory for all the stored TV
channels.
Message
With this function you can enter a personal message on 2 lines which will be
displayed automatically when the set is switched on from standby.
For example: I'll be late this evening. Don't wait for dinner.
Change
Select with the
or
keys the letter or number you want to enter.
Select with the
key the next position.
Press the OK key when you have entered the complete message.
Clear
Press the OK key to remove a previous message.
Type
Press the
or
keys to select the way the message will be displayed:
Wipe, Slide, Fall or Fade.
The Fade display is a randomly selection of the three other display types.
Run
Press the
or
keys to select the display frequency: Continuous, Once
or No.
Display message
Switch the TV to standby.
The message appears on the screen when the TV is switched on again.
If you selected Once, the message will disappear from the screen after
30 seconds.
If you selected Continuous, the message will appear on the screen until the
display frequency is switched off in the Message menu.
The message does NOT appear when Continuous subtitles have been
switched On. See p. 11.
menu.
FEATURES
15
Advertisement
Table of Contents
