Use Of The Remote Control - Philips 42PW9982 User Manual

Select your computer or other
peripherals
Press this key repeatedly to select
or
EXT1, EXT2, EXT3 FRONT
where you connected your peripherals
M
Mode selection
Press this key repeatedly to indicate the
peripheral equipment you want to operate
with the remote control.
TV
TV operation
Press this key to use the remote control
directly in the TV mode.
b
Dual screen
Picture format
Press the key repeatedly to select
another picture format: 4:3, Movie Expand
14:9, Movie 16:9 with or without subtitling,
Super Wide, Wide Screen or Auto Format.
When in Movie Expand 14:9 or 16:9 picture
format, you can make subtitles visible or not
with the
When the broadcaster transmits PALplus
signals, the Movie Expand 16:9 picture
format is selected automatically.
(In case of PALplus transmission, the set also
reproduces PALplus quality.)
Sometimes video recorders or TV
programmes carry special signals which will
automatically switch the TV to the correct
Selecting Auto format, the screen will be
filled as much as possible with the picture in
case of no Palplus transmission or when TV
programmes are not carrying special signals
detecting the correct screen format.
Auto format is disabled when in Dual Screen.
Note: In VGA mode press the
between a 4:3 or a 16:9 picture format.
In Dual screen mode press the
between a full or a squeezed picture format.
Bilingual choice and sound mode
selection
• to switch from Stereo to Mono sound,
in case of stereo transmission or
• to switch from Digital Sound to Digital
Sound available, in case of digital
• to choose between language
language (Dual ), in case of bilingual
The setting is stored for each TV channel
10

Use of the remote control

,
VGA
, according to
(see p. 25).
See p. 17
or keys.
screen format.
key to switch
key to switch
Press this key
transmission;
(Dual ) or
transmission.
separately.
TV
VCR 1 TUNER
VCR 2 TAPE
DVD SAT
M AMP CD
TV
b
OK
P
1 2 3
4 5 6
7 8 9
0
SMART CONTROLS
PICTURE SOUND
Standby
The set is switched off and the red indicator
lights up in front of receiver box and the
screen.
To switch the TV on again, press - P + or the
digit keys.
Your TV consumes energy in the standby-mode.
Energy consumption contributes to air and water
pollution. We advise to switch off your TV
overnight instead of leaving it on standby. You
save energy.
Volume
The volume is adjusted. If you want to store
the volume adjustment in the memory, see
the Features menu, General PP store, p. 15
to store the same volume adjustment for all
the stored TV channels.
P
Programme selection
To browse through the TV channels
activated in the Favourite Programme menu.
See p. 7.
Mute key
Interrupt the sound temporarily or restore it.
0/9
Digit keys
To select a TV channel.
For a two digit programme number, enter
the second digit within 2 seconds.
Previous programme
The previously selected TV channel is
displayed.
Permanent programme number
Screen information
Press for 5 seconds to activate/de-activate
the continuous display of the programme
number.
Press briefly to display information about the
selected TV channel and programme, the
sound reception, the selected DNR setting
and picture format and the remaining time
set with the sleeptimer.