Contents Get started Troubleshooting TV tour Contact Philips Important General TV Environmental efforts TV channel Position the TV Picture Help and support Sound HDMI Use your TV Controls Network Watch TV Product specifications Watch a connected device Ambilight Power and reception...
1 Get started TV tour Remote control To open or close the Find menu. In the Find menu, access the channel list. To adjust the volume. To open or close the Adjust menu. In the Adjust menu, access a range of frequently used settings.
Connect devices To return to the previous menu page or to exit from a TV function. Press and hold to return to watching TV. To select a red menu option, access digital Interactive TV services*, or watch TV For the best picture and sound quality, demonstration clips.
TV. Net TV offers movies, pictures, music For more information about the availability and much more. of HD channels in your country, contact Read more in Use your TV > Browse Net your Philips dealer or visit TV (Page 21). www.philips.com/support.
TV, disconnect the TV from the TV tightly. Place the TV on a flat, the power outlet immediately. Contact level surface that can support the Philips Consumer Care to have the TV combined weight of the TV and the checked before use. stand.
TV, power cord or aerial cable. Energy efficiency Risk of hearing damage! Philips continuously focuses on lowering the Avoid using earphones or headphones environmental impact of our innovative at high volumes or for prolonged consumer products. We aim our efforts periods of time.
Screen off: If you only want to listen to Please act according to your local rules and do not dispose of your old products with audio from the TV, you can turn off the your normal household waste. Correct TV display.
119 cm / 47 inches: 400mm x 400mm, M6 140 cm / 55 inches: 400mm x 400mm, M8 Warning: Follow all instructions provided with the TV mount. Koninklijke Philips Electronics N.V. bears no responsibility for improper TV mounting that results in accident, injury or damage.
(available in certain countries only) Contact Philips If you like, you can contact Philips Consumer Care in your country for support. You can find the contact number in the leaflet accompanying the TV.
2 Use your TV Indicators Controls TV controls 1. Ambient sensor / remote control sensor Ambient sensor is available on certain models only. Remote control +/-: Increase or decrease volume. 2. AMBILIGHT: Switch Ambilight on or off. Ambilight is available on certain models only. (Home): Access the Home menu.
Batteries Warning: Risk of swallowing batteries! The product/remote control may contain a coin-type battery, which can be swallowed. Keep the battery out of reach of children at all times! Caution: The battery contains perchlorate (Home): Access the Home menu. material, handle it with care. For information, (Navigation buttons): Navigate through menus and select items.
You can also view a slideshow of the images in your smartphone on the TV. To download the application 'Philips My Remote', visit the Apple Apps store or the Android Market. Follow the instructions provided at the...
Automatic switch off Ensure that your TV and smartphone are connected to the same local network. Read This TV is designed with energy efficiency more about network connections in settings. If there is no user interaction (such Connect your TV > Computers and the as pressing a remote control button or a Internet (Page 54).
View only analogue or digital TV channels Switch TV channels You can filter the channel list to access only Press on the remote control. analogue or digital channels. Press CH +/- on the TV. 1. In the channel list, press OPTIONS.
1. In the programme guide, press Use smart sound settings OPTIONS. Select your preferred sound setting. 2. Select one of these settings, then press 1. While you watch TV, press ADJUST. 2. Select [Smart sound]. [Set reminder]: Set programme 3.
If you have photos, videos or music files on a USB storage device, you can play the files on Add new device Notes: Caution: Philips is not responsible if the USB Before you watch a connected device, storage device is not supported, nor is it...
OPTIONS to access or exit the Press What you need following picture options: [Show info]: Display the file information. [Stop]: Stop slideshow. [Rotate]: Rotate the file. [Repeat]: Repeat the slideshow. [Play once]: Play the file once. ...
Ambilight. Play (uPnP) router. [Colour]: Select a predefined colour. A Philips wireless USB adapter or a [Custom colour]: Set your own LAN cable that connects your TV to Ambilight colour. To access this option, your home network.
5. Select the media programme and click Enable sharing on Windows Media Allowed. Player 11 A green arrow appears next to the 1. Start Windows Media Player on your media programme. computer. By default, Windows Media Player 2. Select Library > Media Sharing. shares files from these folders: My ...
Internet following options: 2. On your TV, configure Net TV. [Show info]: Display the file 3. On your PC, register with Philips to enjoy information. exclusive benefits and receive updates on [Stop]: Stop slideshow. product information. You can register now ...
A prompt asks if you want to lock adult Options services. Press OPTIONS to select the following: 5. To lock adult services, select [Lock], then [Remove App] press OK. [Lock App] To leave adult services unlocked, select [Unlock App] [Leave unlocked], then press OK.
Rent online video What you can do With this TV, you can rent a video from an online video store. 1. Open a video store. You may need to register or enter your login. 2. Select a video. 3. Make the online payment. 4.
Payment The store prompts you to log in or to open a new account if you do not have one. The login might consist of your email address and a personal PIN code. When you are logged in, you can select the payment method, a credit card, or a value code in most cases.
USB hard disk to the TV and USB hard disk until this process is complete. format it. Caution: Philips is not responsible if the USB hard device is not supported, nor is it responsible for damage or loss of data in the device. ...
Pause a live TV broadcast Switch to another channel. Switch source to watch from a connected device - a Blu-ray disc player or digital receiver. To change playback speed Press repeatedly. To jump back to the beginning of the TV broadcast Press the left navigation button repeatedly until you reach the beginning of the...
USB hard disk to the TV and format it. Caution: Philips is not responsible if the USB hard device is not supported, nor is it 2. Switch on the TV and the hard disk, if it responsible for damage or loss of data has an external power source.
If your TV remote control does not have a 1. From the programme guide page, press button: OPTIONS, select [Manual record], and press OK. and select [Programme guide]. 1. Press 2. Set the channel, date and time span in the 2.
Cancel a scheduled recording Access HbbTV To cancel a scheduled recording: When you tune to a TV channel that offers 1. Select the recording and press HbbTV, the interactive pages will open OPTIONS. automatically or, at some point, you will be 2.
Teletext language View Teletext Some digital TV broadcasters provide several teletext languages. You can set your primary Select a page and secondary language. 1. Select a channel that has teletext feature, 1. Press . then press TEXT. 2. Select [Setup] > [Channel settings] or 2.
Set the clock manually Teletext 2.5 If clock mode is set to [Manual], set the date Teletext 2.5 offers more colours and better and time manually. graphics than normal teletext. If Teletext 2.5 1. In the [Clock] menu, select [Date] or is broadcast by a channel, it is switched on [Time], then press OK.
Parental rating Subtitle language Some digital broadcasters rate their You can change the subtitle language on programmes according to age. You can set some digital channels. your TV to display only programmes with 1. Press . age ratings lower than your child's age. 2.
BRAVIA Sync (Sony). Not all brands are fully compatible with Philips EasyLink. Set Scenea lounge light After you switch on Philips EasyLink, these When the TV is in standby, you can switch features are available: on Ambilight and create a lounge light effect One-touch play with your wallpaper.
To switch on or off EasyLink Other EasyLink buttons are available through the On-Screen Remote Control (OSRC). Note: If you do not intend to use Philips To access the OSRC Easylink, switch it off. 1. While you view content from a connected 1.
TV is in standby. device. 1. Press ADJUST to receive audio from the connected Philips EasyLink device. If available, audio only mode is enabled. 2. Accept the prompt on the TV to turn off the TV screen.
4 Set up your TV [Pixel Plus HD]/ [Pixel Precise HD]: Access advanced settings, including [HD Natural Motion], *[Perfect Natural Motion], [Clear LCD], [Super Settings assistant resolution], [Dynamic contrast], [Dynamic backlight], [MPEG artefact Use the settings assistant to guide you reduction], [Colour enhancement], through the picture and sound settings.
Audio settings Channels Select audio language If the TV channel has multiple or dual sound Reorder and rename broadcast, you can select the preferred audio language. Reorder channels OPTIONS. While you watch TV, press After the channels are installed, you can ...
To disable automatic updates Hide or unhide In the [Channel installation] menu, select Hide channels [Automatic channel update] > [Off]. To prevent unauthorised access to channels, To manually update channels hide them from the channel list. 1. Press . FIND. 1.
Select network Install digital and satellite channels To install cable or antenna channels, you Install digital channels need to switch to the respective network. To improve TV reception, reposition the 1. While you watch TV, press . antenna. You need to know the correct 2.
[Preferences] > [Channel list copy] > dealers and service personnel. [Copy to TV], then press OK.The channel You can copy channel lists from one Philips list is copied to the TV. TV to another through a USB storage 5. Unplug the USB storage device.
Visually impaired Menu language Tip: To verify whether visually impaired audio is available, press OPTIONS and 1. While you watch TV, press . 2. Select [Setup] > [TV settings] > select [Audio language]. Languages with an [Preferences] > [Menu language]. eye icon support visually impaired audio.
1. While you watch TV, press . Note: The update assistant directs you to 2. Select [Setup] > [Watch demos], then the Philips support website. Refer to the press OK. installation instructions on the website to 3. Select a demo, then press OK.
3. In your web browser, navigate to www.philips.com/support. 1. Press . 2. Select [Setup] > [TV settings] > 4. At the Philips Support site, find your [Reinstall TV], then press OK. product and locate the [Help] file for your 3. Follow the onscreen instructions.
5 Connect your About cables Cable quality Overview Before you connect devices to the TV, check the available connectors on the device. Connect the device to the TV with the highest quality connection available. Good quality cables ensure a good transfer of picture and sound.
SCART A SCART cable combines video and audio Use this connection to display PC content signals. on the TV. SCART connectors can handle RGB video For video and sound, use the VGA and signals but cannot handle high-definition AUDIO IN connectors. (HD) TV signals.
Blu-ray or DVD disc player Connect the disc player with an HDMI cable to the TV. Connect the disc player with a component cable (Y Pb Pr) and an audio L/R cable to the TV. TV receiver Connect the satellite or digital TV receiver with an antenna cable to the TV. (SAT is available on certain models only.)
Connect the satellite or digital TV receiver with an HDMI cable to the TV. Connect the satellite or digital TV receiver with a SCART cable to the TV. Connect the satellite or digital TV receiver with a component cable (Y Pb Pr) and an audio L/R cable to the TV.
Recorder Connect the recorder with an antenna cable to the TV. (SAT is available on certain models only.) Connect the recorder with a SCART cable to the TV. Connect the recorder with a component cable (Y Pb Pr) and an audio L/R cable to the TV.
For the best gaming experience, set the TV Game console to game mode. The most practical connectors for a game ADJUST. 1. Press console are on the side of the TV. However, 2. Select [Smart picture] > [Game], then you can also use the connectors at the back press OK.
Home theatre system Connect the home theatre with an HDMI cable and an optical or coaxial audio cable to the TV. (Optical audio output is available on certain models only.) Connect the home theatre with a SCART cable to the TV. Connect the home theatre with a component cable (Y Pb Pr) and an audio L/R cable to the TV.
Digital camera Connect the digital camera with a USB cable to the TV. Digital camcorder Connect the digital camera with an HDMI cable to the TV. Connect the digital camcorder with a component cable (Y Pb Pr) and an audio L/R cable to the TV.
Connect more devices External hard disk Connect the external hard disk with a USB cable to the TV. Computer Connect the computer with an HDMI cable to the TV. Connect the computer with a DVI-HDMI cable to the TV.
Connect the computer with a VGA cable and an audio cable to the TV. Net TV keys on your keyboard Keyboard and mouse Enter : OK to confirm an entry. USB keyboard Backspace : return to the previous *Available on certain models only.
Computers and the To connect your TV to the Internet, you also need a high-speed connection Internet to the Internet. Note: This DLNA1.5 network feature supports these computer operating systems: What you can do Microsoft Windows XP or Vista, Intel Mac Browse PC OSX or Linux.
Most new wireless routers have the WPS Wireless LAN ready system and carry the WPS logo. The WPS This section is only for wireless ready TVs. system uses WPA security encryption and With the Wireless USB adapter PTA01 cannot be combined with devices on your accessory (sold separately), you can connect network that use the WEP security the TV to your home network wirelessly.
Due to output content protection, adapter, check with your local retailers or certain commercial DVD or Blu-ray buy online at www.philips.com/tv. discs may not be projected. Install Wi-Fi MediaConnect (with CD- The TV shows PC media files with a ROM) small delay.
1. Switch off the TV. Common interface 2. Follow the directions printed on the CAM and insert the CAM into the Common Interface at the side of the TV. What you can do 3. Push the CAM in as far as it will go, then To watch some digital TV programmes, you wait for the CAM to be activated.
TV at www.philips.com/support. due to the normal expansion and contraction of the TV as it cools and warms You can also contact Philips Consumer Care up. This does not affect performance. in your country for support. You can find the...
An "e-sticker" banner displaying Picture information appears on the TV display: The TV is in [Shop] mode. To remove the The TV is on, but there is no picture or the e-sticker, set the TV to [Home] mode, then picture is distorted: restart the TV.
HDMI There are problems with HDMI devices: USB device content is not displayed: Note that HDCP (High-bandwidth Make sure that the USB storage device is set to Mass Storage Class compliant, Digital Content Protection) support can delay the time taken for a TV to display as described in the storage device's content from a HDMI device.
For power consumption, see the Incredible Surround product specifications at Clear Sound www.philips.com/support. Dynamic Bass Enhancement The power rating stated on the product Mono / Stereo / NICAM typeplate is the power consumption for this...
Use your TV legend to note the weight of the TV with stand. Use your TV legend to note the dimensions of your TV (with and without the stand). Use your TV legend to note the thickness of your TV (with and without the stand). Help version UMv 3139 137 04513 - 20110915...