4.6 Features Menu
Press
1
2 Select [Setup]
then press OK
> Select [Features]
3
Select one of the following settings then
Press
to move, and press
OSD Duration
Picture
Blueback
Sound
Sleep Time
Factory Settings
Features
Installation
•
[OSD Duration] :This function is used to OSD
timeout in step of 15,30,45,60 secs.
•
[Blueback] :This function is used to ON/OFF
the blue screen at no signal condition.
•
[Sleep Time] :This function is used to ON/OFF
step of 10,20,30,60,90,120,180,240 mins.
•
[Factory Settings] :This function is used for
Reset to factory default settings.
[Features in VGA Mode] :
• [Auto Adjust]:This automatically adjust
H & V-position,Phase and Clock for VGA
mode.
• [H-Position]: Adjust the horizontal
position of image [Only in VGA].
• [V-Position]: Adjust the vertical
•
position of image [Only in VGA].
[Clock]:If picture is not OK
•
•
with Auto Setting, then adjust by manual
clock [Only in VGA].
[Phase]:If picture is not OK with Auto
•
•
Setting, then adjust by phase.
[Only in VGA].
12 EN
4.7 Installation Menu
to adjust.
Press .
1
Select [Setup]
2
> Select [Installation]
3
Select one of the following settings, then
Press
to move, and press
[Color System] : Change the color system
•
(AUTO/PAL/NTSC) setting if the picture
is not reproduced properly.
Note: For India color system is Auto or
PAL.
•
[Sound System] : Change the sound
sound system (BG/M/DK/I) setting if sound
is not reproduced properly.
Note: For India sound system is BG.
[Skip]: This function is used to Skip any
•
programme.
•
[Auto Search] :Select the function TV
set will start auto tuning for all available
channels.
[Manual
Search :Select this for manually
•
searching the channels,select the function
from which tuning will start.
[Channel Edit]: You can Delete, Rename,
•
Move or Skip any programmes.
then press OK
to adjust.
]