Advertisement
Section 3: Mounting
Flush Mount
Flush-mount Bracket Installation Notes:
Bracket shape varies for each model, draw ing for illustration purposes
only. See dimensional draw ing for exact dimensions.
1. Attach bracket "A" To
touch display
2. Attach bracket "C' to customer panel per drawing (all four sides)
3. Attach bracket "B" to bracket "C" on all four sides with M4 screws (included)
4. Adjust depth of bracket "B" so monitor is flush with customer panel
touch display
5. Place
into customer panel opening
touch display
to bracket "B" from behind with M4 screws (included)
6. Secure
Side Bracket Mount
Side-mount Bracket Installation Notes:
Bracket shape varies for each model, draw ing for illustration
purposes only. See dimensional draw ing for exact dimensions.
(all four sides) with M4 screws (included)
User Manual: 90 Series
UM600050 Rev D, page 7 of 25
Advertisement
