Table of Contents
Advertisement
Control Systems Inc.
HYDRobloC CoolInG:
DIal oPeRaTIon & seT sTaTUs MoDe
Set
70.0
°F
Min
Temp
System
Status
70.0
System
Care must be taken to prevent condensation forming on any exposed piping, panels or devices which
cold water flows through. To avoid condensation, the chilled water temperature must be set above the
ambient dew-point temperature.
DIal ManIPUlaTIon
There are 2 modes for the control, programming and status screens.
The programming screen is identified by the seT icon in the top/middle
left corner. The status screen is indicated by the sTaTUs icon in the
top/middle left corner.
By pressing the dial in for more than 1 second will allow the user to access
the programming section of the control.
Cool demand is indicated by the Cool indicator in the top left corner of
the screen.
°F
Temp
H B X H Y D 0 1 0 0 H y d r o B l o c
Cool
Set
70.0
°F
Temp
System
H y d r o B l o c M a n u a l P a g e 1 1
V e r s i o n 2 . 1 0
Advertisement
Table of Contents
