Page 1
Installation Manual SensorLinx™ Pressure Sensor Installation Guide Version 2.0.3 WPS-0014 WPS-0030 WPS-0070 WPS-0130 WPS-0400 HBX Control Systems Inc.
The HBX Sensorlinx™ Metering System is a microprocessor based controller and as such is not to be regarded as a safety (limit) control. Please consult and install the heating or cooling appliance in accordance with the manufacturer’s recommendations.
NAME AND PIN INFORMATION The label displays the serial number which will match the serial number on your actual HBX Sensorlinx™ Sensor, the lot number, the bar code and the products PIN. WFS-0 Sync Code: APRE1234...
HVAC, Solar thermal heating and Geothermal. The sensors can be used individually to track many system parameter configurations in real time using the HBX ThermoLinx™ App. When the Sensorlinx™ sensors are used in conjunction within your liquid system, the system allows for accurate Heat measurement.
TECHNICAL DATA AND DIMENSIONS No pipe tape/dope should be used on threads. WPS-0014 WPS-0030 WPS-0070 WPS-0130 WPS-0400 137.5 3.23 3.46 5.08 5.41 7.09 L/MIN 1.4 -14 3-30 7-70 13-130 20-400 0.36-3.69 0.70-7.92 1.84-18.49 3.43-34.34 5.28-105.67 Flow Tube Union Pipe Pressure Part Flow Tube House Torque...
DEVICE WIRING 24 VAC R (Red) 24 VAC C (White) Ground (Blue) Thermistor Input (Yellow) 24 VAC Triac Output, 0.5A Max (Green) Modulating Output (Black) 1/2: Input Power: This input is to power the sensor. 1 Amps at 24VAC is required to power this device.
INSTALLATION Sensor can be mounted Vetically or horizontally within a 180 arc. Sensor CANNOT mounted pointing below this line or downwards. No pipe tape/dope should be used on threads. EscriPtion Install the temperature and pressure sensor in a location that will be easy to perform periodic maintenance.
CONNECTING TO A NETWORK (ANDROID) WiFi Setup 9:41 AM 100% WiFi Setup --°F 9:41 AM 100% --°F Add Name Here Add Name Here CHOOSE A NETWORK CHOOSE A NETWORK Home Network Home Network ThermoLinx ThermoLinx Network SSID Home Network Network SSID Home Network 1234 Press the SET button on the Flow Sensor, and wait...
CONNECTING TO A NETWORK (IOS) WiFi Setup 9:41 AM 100% --°F Add Name Here CHOOSE A NETWORK Home Network ThermoLinx Network SSID Home Network Press the SET button on the BTU Flow 1234 Sensor, and wait 60 seconds. If the red LED Network Password light (Wi-Fi) on the sensor is not blinking, Connect to WiFi Now...
Page 15
Solid Green Only: Incorrect password Solid Red and Green: ThermoLinx is connected to your Wi-Fi but your network port 1314 is closed and not allowing communication to the HBX server, please contact your internet provider to rectify this. Connections can only be made to a 2.4GHz network.
NAVIGATING THE THERMOLINX APP Relay Closed: Indicates if the relay is closed to activate a pump or valve. Setup: Adjust Relay output, Fluid, and thermistor settings. Sensor Info: Provides sensor type and unit serial number. Alarms: Set alarm notification for flow, temperature, and pressure. Temperatures: View temperature, flow and pressure data in real time System Status: View Current Heat measurement and lifetime Heat accumulation for days, week, monthly, and yearly.
In no event will HBX be liable for any damages, including loss of data, loss of profits, costs of cover or other incidental, consequential or indirect damages arising out of the installation, maintenance, commissioning, performance, failure or interruption of an HBX product, however caused and on any theory of liability.
Need help?
Do you have a question about the SensorLinx WPS-0014 and is the answer not in the manual?
Questions and answers