Twin Spray Set Up - LG GCWP1069CS Owner's Manual

11-6. Twin spray set up

Entering set up mode.
You will see LqC1
Press the Hot button.
Press the Warm or the Cold button until
Press the Start button.
Press the Warm or the Cold button until
Press the Start button.
Display
Press the Warm or the Cold button until
Press the Start button.
Press Warm or Cold button and then select
Press the Start button.
The machine sets up the pre-wash, then advances to the next process
automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
.
or
.
Disable
Enable
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• OPL type - Push the Hot button twice.
PROGRAMMING MODE - SETUP MODE
Button
appears in the display.
appears in the display.
appears in the display.
41
Display
One or the other will
display.