Table of Contents
Advertisement
LA CROSSE VIEW
Adding Your Sensors to the App
12 34
Cancel
Add Device
2
Please wait up to 15 minutes
for your additional devices
to connect to your account.
Check the notification icon when
Manually Add Your Sensors to the App*
your devices are ready to add.
If you do not receive device
1.
Open your La Crosse View app. On the
notifications, go to the Main Menu
and select Add/Edit Devices to
Main Menu, scroll to ADD/EDIT and select
add your devices separately.
DEVICES.
2.
On the Devices page, select the ADD
DEVICE or PLUS (+) button.
3.
Scan the Barcode on your Sensor or type
in the Device ID manually.
4.
Confirm the sensor image and Device
ID and add a Device Name and Location
Name. Select DONE.
100%
Save
Upon getting the display connected to your Wi-Fi network, the app will
explain how your connected sensors should be brought in. Within the
next 15 minutes, you should receive an Add Device notification in your
app. This is indicated by the Red Cloud and the number inside of it. Tap
this icon to begin adding your sensors into the app.
▲ Back of Thermo-Hygro Sensor
Inside of Glide Pro Sensor ⊲
* This step is only required if you do not receive the Add Device
notification within the app.
Prior to mounting/positioning your sensors, make sure your
display is receiving sensor data.
123456-ABC
123456-ABC
05
02
Advertisement
Table of Contents
