Subscribe to Our Youtube Channel
Related Manuals for EUFY RoboVac G30
Summary of Contents for EUFY RoboVac G30
- Page 1 RoboVac G30 (T2250) G30 Edge (T2251) G30 Verge (T2252) G30 Hybrid (T2253) Owner's Manual T2250/T2251/T2252/T2253 51005003796 V02...
-
Page 2: Table Of Contents
Clean the Sensors and Charging Pins physical, sensory or mental capabilities or lack first unscrew the screws on the bottom, then Use Your RoboVac with the eufy Clean App Clean the Swivel Wheel of experience and knowledge if they have been remove the back cover. - Page 3 • This device is for indoor use only. • Do not expose the electronics of this device, its fire or temperature above 130°C may cause an Notice • This device is not a toy. Do not sit or stand on battery, or the integrated Charging Base.
-
Page 4: About Your Robovac
About Your RoboVac measures: (1) Reorient or relocate the receiving antenna. (2) Increase the The full text of the EU declaration of conformity is available at separation between the equipment and receiver. (3) Connect the equipment the following internet address: https:/ /support.eufylife.com/s/ into an outlet on a circuit different from that to which the receiver is articleRecommend?type=DownLoad connected. -
Page 5: What's In The Box
What's in the Box RoboVac Anatomy A. Top & Side Bumper Wi-Fi Status Light Auto cleaning control button Recharge button Spot cleaning button RoboVac Charging Base Power Adapter Infrared sensor Main power switch (On/Off) Dust collector Dust collector release button B. -
Page 6: Buttons & Indicators
Filter element Status light • When you use the Find My Robot function via the eufy Clean Remove power cords and small objects from the floor that may app, all three LED indicators are solid blue and a voice prompt entangle RoboVac. -
Page 7: Charge Your Robovac
Turn on the main power switch at the right side of RoboVac. Connect the round connector of the adapter into the power socket Attach RoboVac to the Charging Base by aligning its charging pins on the Charging Base and the other end into a wall outlet. with the charging pins on the base. -
Page 8: Use Your Robovac With The Eufy Clean App
Schedule Cleaning Press again to pause cleaning. With the eufy Clean app, you can schedule RoboVac to start cleaning at a particular time. Select a Cleaning Mode 1. Download the eufy Clean app from the App Store (iOS devices) or •... -
Page 9: Select A Suction Power Level
• RoboVac automatically sweeps and mops in the selected mode. In the eufy Clean app, select a suction power level according to your needs: Before mopping, peel off the stickers on the waterproof pad and When RoboVac finishes working and returns to the Charging Base, •... -
Page 10: Use Robovac With Amazon Alexa / The Google Assistant
Rolling Brush Once every week Every 6-12 months Open the eufy Clean app and find “Smart Integrations” in the top left. • After mopping, remove the water tank, empty any remaining water and clean the washable mopping cloth to prevent the Every 3-6 months (or Follow the on-screen instructions to complete the setup. -
Page 11: Clean The Mopping Cloth And Water Tank
Clean the Mopping Cloth and Water Tank Clean the Side Brush Clean the Sensors and Charging Pins • Be careful not to touch the path tracking sensor with your hands *Only applicable to G30 Hybrid (T2253) to make it dirty. •... -
Page 12: Troubleshooting
4.9 ft/ 1.5 m (indicated by a solid blue LED light) before visit www.eufy.com, go to eufy Clean app, or contact • Make sure the scheduled time has been of the front of the Charging Base. -
Page 13: Voice Alert
• Battery Temperature may be too high or start, clean the edge sensor and try again. Manual or App for • Make sure you have an eufy Clean account occurred. low; wait until the battery falls to normal help. -
Page 14: Specifications
Manual or App for suction inlet before restarting the device. Battery Voltage 14.4 V help support@eufy.com Power Consumption 40 W Error S8: Path Tracking www.eufy.com • Check and clean the path tracking sensor 14.4V Battery Type Sensor Error.
Need help?
Do you have a question about the RoboVac G30 and is the answer not in the manual?
Questions and answers
WHAT DIES "ERROR S1 BATTERY ERROR" MEAN?