Table of Contents
Advertisement
3.1 Description
The Ferno® iN∫LINE® Fastening System is a device designed to
secure a compatible Ferno ambulance cot inside a ground-based
ambulance.
The fastening system is compatible only with the Ferno® iN∫X®
Patient Transport & Loading System™.
Three lengths are available: iN∫LINE-S, iN∫LINE-M, and iN∫LINE-L. In
this manual, the term fastening system refers to all versions. When
differences exist, the specific model name is used.
The fastening system is for professional use only by trained
Emergency Medical Service operators. See "Operator Focus" on
page 7.
Aluminum Construction: The exterior is impact-resistant and
●
easy to clean.
ICS® Automatic Charging: The charging system is integrated
●
into the fastening system and charges or maintains the
charge in the cot battery whenever the cot is secured in the
fastening system. Cot power switches to OFF when secured
in a powered ICS.
Safety Hook: The integrated safety hook functions as a
●
safety stop to hold the cot secure inside the ambulance while
operators raise and lower the legs during the loading and
unloading process
Release Button: Single-press button unlocks the cot for
●
unloading.
Tested and Certified for Worldwide Standards Compliance:
●
See "Compliance" on page 5.
Track Loading: Allows loading of the cot from a variety of angles.
●
Common Components: The only variation between iN∫LINE
●
models is the overall length of the fastening system.
8
3 - ABOUT THE FASTENING SYSTEM
FEATURES
iN∫LINE®
Improper use can cause injury. Use the fastening system
only for the purpose described in this manual.
An improper cot can cause injury. Use only a compatible
Ferno cot designed for use with the fastening system.
Installation Overview
To install the fastening system, follow the instructions in the
iN∫LINE installation manual. A manual is provided with each
installation kit. For additional manuals, contact Ferno. See
"Ferno Customer Relations" on page 2.
As a user, be aware of the following:
The ambulance must comply with the standards of the
●
country in which it is used. See "Compliance" on page
5 for a list of standards met by the fastening system.
●
Inspect under the ambulance for obstructions and for
suitable support structure. The installer should install
support structure if needed.
Inspect the fastening system regularly to ensure it
●
meets all required standards required by your local
government. See "Inspecting the Fastening System" on
page 12.
●
Install a new fastening system when remounting an
ambulance box. Removing and reinstalling an old
fastening system can weaken the fastening system.
If the ambulance is involved in a traffic accident,
●
inspect it. See "Inspecting the Fastening System" on
page 12. Replace any damaged components.
Frame
Internal Components
Other
WARNING
Construction
Aluminum
Steel
Plastic
© Ferno / 234-3621-02 / October 2022
Advertisement
Table of Contents
