Table of Contents
Advertisement
1.6 Compliance
SPECIFICATIONS AND STANDARDS
When properly installed and used with appropriate additional
Ferno products, the iN∫LINE® fastening system meets or exceeds the
following global specifications and standards.
AMD: Ambulance Manufacturer's Division (AMD) of the
●
National Truck Equipment Association Standard 004, Litter
Retention System Static Test.
●
KKK-A-1822 (F): Federal Ambulance Specification KKK-A-1822
revision F as applicable.
●
NFPA 1917: National Fire Protection Association standard.
SAE: Society of Automotive Engineers SAE J3027 Recommended
●
Practice.
CAAS: Commission on Accreditation of Ambulance Services
●
Global Vehicle Standard (GVS)
●
IP56: Ingress Protection rating for dust and water infiltration.
Ontario: Ontario Land Ambulance Standard Section 20.1 Main
●
Cot Retention.
●
BCAS: BCAS Ambulance Performance Test Criteria E2 Stretcher
Retention.
●
Alberta: Alberta Health and Wellness Ambulance Vehicle
Standard Code Section 17.5 Cot Retention System Test.
AMD 004 Litter Retention System Static Test. (Some provinces
●
follow the U.S. AMD specification.)
AUSTRALIA/NEW ZEALAND
AS/NZS 4535. Meets the requirements of the Ambulance
●
Restraint Systems test.
●
CE: Meets European Norms.
RoHS-2: Meets the requirements of RoHS-2 Directive 2015/863
●
on the Restriction of the Use of Certain Hazardous Substances.
EN 1789 and EN 1865: Vehicle, fastening system, and crash-test
●
standards.
© Ferno / 234-3621-02 / October 2022
U.S.A.
CANADA
EUROPE
iN∫LINE®
5
Advertisement
Table of Contents
