Table of Contents
Advertisement
Setup
Manual Filling
To access and manually fill the water reservoir:
1. Open the fluid refill cover.
2. Remove the fog fluid tank.
3. Pour in distilled water, up to 2 gallons.
4. Return the fog fluid tank to its place and close the fluid refill cover.
Do NOT overfill.
While operating the Cumulus HP without the water inlet connection, make sure there is
adequate distilled water in the machine to prevent pump damage. When the water level
becomes low, simply add more water to continue using the Cumulus HP.
Cumulus HP User Manual Rev. 1
Distilled
water
6
Advertisement
Table of Contents
