Installing the Hose and Floor Nozzle
The included output hose and floor nozzle allow the low-lying fog output to be directed as desired at a
short distance from the Cumulus HP. To install the hose and floor nozzle:
1. Place the hose coupler over the output nozzle and turn clockwise until secure.
2. Put one end of the hose through one of the hose clamps and over the hose coupler.
3. Ensuring the hose clamp is over both the hose and the hose coupler, turn the wingnut clockwise
until the hose is secured to the coupler.
7
Cumulus HP User Manual Rev. 1
Setup