Advertisement
6. Magetron Assembly Removal (Refer to Fig. 14)
(A) Remove the cabinet parts.
(B) Remove the back plate.
(C) Remove the support magnetron.
(D) Disconnect all connectors from the magnetron and
damper assembly.
(E) Remove five(5) screws on damper assembly.
(G) Remove
four(4) flange nuts from magnetron hex
bolts.
CAUTION: MICROWAVE LEAKAGE
Never install the magnetron without the metalic gasket
plate witch is packed with each magnetron to prevent
microwave leakage. (Refer to Figs. 15, 16)
Whenever repair work is carried out on magnetron, the
microwave leakage should be checked according to
the procedures specified in the "Microwave leakage
Test" on page 27.
..DO NOT OPERATE WITHOUT CABINET...
Magnetron Antenna
Wave Guide
Metallic Gasket Plate
(Fig. 16)
Advertisement
