Advertisement
Disassembly & Parts Replacement Procedure
7. Door Assembly Removal (Refer to Fig. 17)
(A) Remove the cabinet parts.
(B) Remove two(2) screws securing the top door hinge.
(C) Remove three(3) screws securing the bottom door
hinge.
(D) Remove the door assembly.
i
&
(Fig. 17)
& Damper Assembly Removal (Refer to Fig. 18, 19)
(A) Remove the cabinet parts.
.
(B) Remove the support magnetron.
(C) Disconnect all connectors from damper assembly.
(D) Remove five(5) screws $3, S1 on damper assembly.
(E) Remove the damper assembly.
(F) Remove three(3) screws S2.
(G) Remove the damper sub-assembly.
(H) Remove the CAM 8.
(1) Remove the clip 11 from damper pin-plate 9.
(J) Draw out the pin-plate 9 from damper assembly.
(K) Draw out the damper lever 10 from the damper cover
1
(L) Remove the damper plate 2 with the damper rubber
silicon 3.
(M) Remove the damper rubber silicon 3.
(N) Remove one screw $4 on micro switch 7.
(O) Remove the micro switch 7 and insulation sheet 6.
(P
(
) Remove two(2) screws S5 on synchronous motor 4.
Q) Remove the synchronous motor 4.
Advertisement
