Advertisement
(D) Make flat two locking legs on the fan motor bracket
by the nipper and draw the bracket out.
AT THIS TIME, BE CAUTIOUS NOT TO BREAK THE
LOCKING LEGS.
(E) Remove one screw from the bracket of H.V. capacitor.
(F) Remove a capacitor bracket with capacitor.
2. Fan Motor Removal (Refer to Fig. 8)
(A) Remove the cabinet parts.
B) Disconnect all connectors and terminals.
) Remove three(3) screws.
) Make flat two locking legs on the fan motor bracket
with the nipper and draw the bracket out.
AT THIS TIME, BE CAUTIOUS NOT TO BREAK THE
LOCKING LEGS.
CAUTION:
H.V. Lead from transformer to capacitor must be con-
nected to inside Terminal 'B', not 'A'.
A
1QD/e
D: To H.V. Transformer Heater winding
E: To H.V. Rectifier Diode
F: To Magnetron
17
Advertisement
